AVSPARE.COM
parts catalog

PLATE AS 3W9217 - Caterpillar


3W9217 PLATE AS Caterpillar parts 561H, D4H, D4H XL, D4HTSK II, D5H, D5H XL, D5HTSK II
Rating:
43
Alternative (cross code) number:
CA3W9217
3W-9217
3W9217
Caterpillar 3W9217 PLATE AS
Weight: 24 pounds 11 kg.

Buy PLATE AS 3W9217 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER, TRACK-TYPE TRACTOR,

Compatible equipment models: 3W9217:

PIPELAYER  561H  
TRACK SKIDDER  D4HTSK II   D5HTSK II  
TRACK-TYPE TRACTOR  D4H   D4H XL   D5H   D5H XL   Caterpillar
Number on catalog scheme: 1
  For full view, you need register

Information:


Illustration 1 g03366944
Table 1
Specification for 352-9765 Electric Starting Motor Gp and 150-8867 Electric Starting Motor Gp
Item Qty Part Specification Description
1 2 6V-8188 Nut Final installation torque to 30.5 3.5 N m (269.9 30.9 lb in).
B - - Clearance between the pinion and the housing is 9.1 mm (0.36 inch).
2 1 4B-2049 Nut Final installation torque to 3.4 1.2 N m (30.1 10.6 lb in).
3 1 4B-2049 Nut Switch terminal.
The switch terminal must be insulated with heat shrinkable tubing. Do not use molded terminals.
Final installation torque to 3.4 1.2 N m (30.1 10.6 lb in).
4 1 6V-8188 Nut Ground terminal.
Final installation torque to 30.5 3.5 N m (269.9 31.0 lb in).
5 1 6V-8188 Nut Battery terminal.
A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the cable terminals may be equal to or greater than 0 AWG.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
6 - - Motor frame terminal.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
- - - Pull-in current at 10 V and 20° C (68° F) is 82.0 to 94.2 Amp.
Hold-in current at 10 V and 20° C (68° F) is 16.4 Amp max.
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
- - - No load conditions at 25 °C (77 °F):
Speed is 4600 to 7100 rpm.
Current is 210 to 305 Amp.
Voltage is 11 VDC.

Caterpillar parts catalog:

Caterpillar parts catalog
D4H Track-Type Skidder Series II 8ZF00001-UP (MACHINE) POWERED BY 3204 Engine
D5H Track-Type Skidder Series II 7EG00001-UP (MACHINE) POWERED BY 3304 Engine
D5H LGP Series II Track-Type Tractors Power Shift 1DD04000-UP (MACHINE) POWERED BY 3304 Engine
D4H XL D4H Series IIILGP Track-Type Tractors 8PJ00001-UP (MACHINE) POWERED BY 3304 Engine
D4H LGP Track-Type Tractor Direct Drive 4NK00001-UP (MACHINE) POWERED BY 3304 Engine
D5H Track-Type Tractor Power Shift XL 8RJ00001-UP (MACHINE) POWERED BY 3304 Engine


Parts plate Caterpillar catalog:

9G9614 PLATE-IDENTIFICATION
D4H, D4HTSK II, D5H, D5H XL
3S2654 PLATE
815B, 950B, 950F, 950F II, 960F, 977K, 977L, D5H, D5H XL, R1300
7X7816 PLATE-SERIAL NUMBER
120H, 12H NA, 140H NA, 527, 561M, 561N, 611, 613G, 615C, 770, 772, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 777G, 789D, 793F, 793F CMD, 793F OEM, 793F-XQ, 834G, ...
9P0182 PLATE
517, 527, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
3W6473 PLATE
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
3W2527 PLATE AS
527, D5H, D5H XL, D5HTSK II
5P7184 PLATE-WARNING
561M, 561N, D10, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D6M, D6N
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.