PLATE AS 4177045 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 384-9657 Lifting Eye Assembly 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03845715
Use a suitable lifting device and Tooling (A) to set the aftercooler (18) in place. The weight of aftercooler (18) is approximately 45 kg (100 lb).
Install bolt (17).
Illustration 2 g03845713
Install bolts (15), connect the hoses, and install hose clamps (16).
Illustration 3 g03845704
Install guard (13) and nuts (14)
Illustration 4 g03845692
Install bracket (10), nuts (12), and bolt (11).
Illustration 5 g03858775
Install nuts (7).
Install guard (8) and bolt (9).
Illustration 6 g03849099
Install guard (5) and bolts (6).
Install the guard (3), the spacers, the washers, and mounts (8).
Position harness assemblies (2) and install the cable straps holding harness assemblies (2) to guard (3).
Install bolt (4).
Fill the coolant system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct filling procedure. End By:
Install air inlet shut off
Install electronic control module