4211714 PLATE Caterpillar parts
Rating:
Alternative (cross code) number:
CA4211714
421-1714
4211714
CA4211714
421-1714
4211714
Weight: 1 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Replacement Ignition Coil Kit (Ruthenium HX) (Gap 0.044) Mechanics Choice for BMW (also fits p/n 4211714)
Sawyer Auto 【❗Fitment Details❗:】Fits EngineVersionName:N/R | WheelBaseMetric: | Ignition Coils & Spark Plugs Kit | Gap 0.032 inch - One per cylinder - with Spark Plug Connector | Only for Models with: Engine Code M73 | VIN | - Inch Wheel || ✅【OE Standards:】Our Product Is Designed And Manufactured With Modern Tooling, Ensuring Optimal Quality And Reliability || ✅【Quality Manufacturing:】Replacement Parts are Specifically Designed as an Upgrade from the Original Materials Provided by the OEM || ✅【Direct Replacement:】Our Direct Fit Replacement Product Installs Seamlessly, Just Like the Factory Unit || ✅【Road Tested:】Each Product Undergoes Rigorous Inspection to Ensure Utmost Reliability and Quality
Sawyer Auto 【❗Fitment Details❗:】Fits EngineVersionName:N/R | WheelBaseMetric: | Ignition Coils & Spark Plugs Kit | Gap 0.032 inch - One per cylinder - with Spark Plug Connector | Only for Models with: Engine Code M73 | VIN | - Inch Wheel || ✅【OE Standards:】Our Product Is Designed And Manufactured With Modern Tooling, Ensuring Optimal Quality And Reliability || ✅【Quality Manufacturing:】Replacement Parts are Specifically Designed as an Upgrade from the Original Materials Provided by the OEM || ✅【Direct Replacement:】Our Direct Fit Replacement Product Installs Seamlessly, Just Like the Factory Unit || ✅【Road Tested:】Each Product Undergoes Rigorous Inspection to Ensure Utmost Reliability and Quality
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-0005 Spanner Wrench 1
B 1P-0074 Slide Hammer Puller 1
8B-7555 Adapter 1
1H-3109 Leg 1
8B-7559 Adapter 1 Note: Thoroughly clean all parts of the brake accumulators prior to assembly.
Check the O-ring seals, the backup rings and the wear rings. If any of the parts are worn or damaged, use new parts for replacement.
Illustration 1 g00336021
Install the wear ring and the seal assembly on piston (8).
Install piston (8) halfway into the brake accumulator. Make sure that the threaded hole in the piston is facing toward the head end of the brake accumulator. Then use Tooling (B) to push the piston to the bottom of the brake accumulator.
Illustration 2 g00336020
Illustration 3 g00336019
Install backup ring (6) and O-ring seal (7) on head (5).
Illustration 4 g00335957
Put clean 5P-0960 Molybdenum Grease on the threads in the brake accumulator and on the head of the brake accumulator. Install head (5) in the brake accumulator. The torque for the head is 600 130 N m (440 96 lb ft).
Install clamp assembly (3), the two washers, the bolt and nut (2) on brake accumulator (4).
Install valve assembly (1) and the washer in the head of brake accumulator (4). The torque for the valve assembly is 50 9 N m (37 7 lb ft). End By:
Install the brake accumulators. Refer to Disassembly and Assembly, "Brake Accumulator - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-0005 Spanner Wrench 1
B 1P-0074 Slide Hammer Puller 1
8B-7555 Adapter 1
1H-3109 Leg 1
8B-7559 Adapter 1 Note: Thoroughly clean all parts of the brake accumulators prior to assembly.
Check the O-ring seals, the backup rings and the wear rings. If any of the parts are worn or damaged, use new parts for replacement.
Illustration 1 g00336021
Install the wear ring and the seal assembly on piston (8).
Install piston (8) halfway into the brake accumulator. Make sure that the threaded hole in the piston is facing toward the head end of the brake accumulator. Then use Tooling (B) to push the piston to the bottom of the brake accumulator.
Illustration 2 g00336020
Illustration 3 g00336019
Install backup ring (6) and O-ring seal (7) on head (5).
Illustration 4 g00335957
Put clean 5P-0960 Molybdenum Grease on the threads in the brake accumulator and on the head of the brake accumulator. Install head (5) in the brake accumulator. The torque for the head is 600 130 N m (440 96 lb ft).
Install clamp assembly (3), the two washers, the bolt and nut (2) on brake accumulator (4).
Install valve assembly (1) and the washer in the head of brake accumulator (4). The torque for the valve assembly is 50 9 N m (37 7 lb ft). End By:
Install the brake accumulators. Refer to Disassembly and Assembly, "Brake Accumulator - Install".
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
4206232
PLATE AS
Caterpillar
Caterpillar
4204096
PLATE
Caterpillar
Caterpillar
4199850
PLATE AS
Caterpillar
Caterpillar
4195473
PLATE AS
Caterpillar
Caterpillar
4194601
PLATE
Caterpillar
Caterpillar
4193600
PLATE AS
Caterpillar
Caterpillar
4251429
PLATE AS
Caterpillar
Caterpillar
4251427
PLATE AS
Caterpillar
Caterpillar
4233129
PLATE AS
Caterpillar
Caterpillar
4233055
PLATE
Caterpillar
Caterpillar
4233054
PLATE
Caterpillar
Caterpillar
4214308
PLATE
Caterpillar
Caterpillar