4305967 PLATE-WARNING Caterpillar parts
Rating:
Alternative (cross code) number:
CA4305967
430-5967
4305967
CA4305967
430-5967
4305967
Information:
Improved Angle Sensors
The new 312-0754 Position Sensor As and the dual axis 312-0755 Position Sensor As are now available.
Illustration 1 g01849378
(1) 312-0754 Position Sensor As (2) 322-0221 Housing Bracket (3) 322-0222 Cover (4) 312-0755 Position Sensor As (5) 292-4538 Adapter As Refer to Table 1 for information on the replacement sensors and brackets.
Table 1
System     Former Sensor     New Sensor     New Bracket     New Cover Plate     Adapter (CAES)    
AccuGrade     265-8059     312-0754     322-0221     322-0222     N/A    
CAES     243-4115     312-0755     322-0221     322-0222     292-4538    
    243-4116
243-4117
243-4118     312-0754     322-0221     322-0222        The improved 312-0754 Position Sensor As replaces the former 265-8059 Position Sensor As .The 312-0754 Position Sensor As uses a new 322-0221 Housing Bracket and 322-0222 Cover for installation on AccuGrade Systems. On a CAES system, an additional 292-4538 Adapter As is required in order to mount both the 312-0754 Position Sensor As and the 312-0755 Position Sensor As .The new sensors are supported with Caterpillar Electronic Technician (ET). The sensors can also be upgraded with the display. Also, these new sensors are fully supported in the AccuGrade version 11 software.When you replace a 312-0754 Position Sensor As on an AccuGrade System with a new 312-0754 Position Sensor As, you do not need to calibrate the new sensor. If you are replacing a 265-8059 Position Sensor As with an 312-0754 Position Sensor As the new sensor will need to be calibrated. The calibrations for the 312-0754 Position Sensor As are stored in the display.If you are replacing a 243-4115 Position Sensor, 243-4116 Inclination Sensor, 243-4117 Inclination Sensor or a 243-4118 Inclination Sensor on a CAES system with a 312-0754 Position Sensor As or 312-0755 Position Sensor As, the new sensor needs to be calibrated. The calibration data is stored in the "configuration.ini" file that is located on the D3:C4 Nav 10.4 display. For additional information on mounting and configuring the sensors, refer to Special Instruction, REHS3256, "CAESultra Installation for Excavators" or Special Instruction, REHS3697, "CAESultra Installation for Hydraulic Front Shovels".
The new 312-0754 Position Sensor As and the dual axis 312-0755 Position Sensor As are now available.
Illustration 1 g01849378
(1) 312-0754 Position Sensor As (2) 322-0221 Housing Bracket (3) 322-0222 Cover (4) 312-0755 Position Sensor As (5) 292-4538 Adapter As Refer to Table 1 for information on the replacement sensors and brackets.
Table 1
System     Former Sensor     New Sensor     New Bracket     New Cover Plate     Adapter (CAES)    
AccuGrade     265-8059     312-0754     322-0221     322-0222     N/A    
CAES     243-4115     312-0755     322-0221     322-0222     292-4538    
    243-4116
243-4117
243-4118     312-0754     322-0221     322-0222        The improved 312-0754 Position Sensor As replaces the former 265-8059 Position Sensor As .The 312-0754 Position Sensor As uses a new 322-0221 Housing Bracket and 322-0222 Cover for installation on AccuGrade Systems. On a CAES system, an additional 292-4538 Adapter As is required in order to mount both the 312-0754 Position Sensor As and the 312-0755 Position Sensor As .The new sensors are supported with Caterpillar Electronic Technician (ET). The sensors can also be upgraded with the display. Also, these new sensors are fully supported in the AccuGrade version 11 software.When you replace a 312-0754 Position Sensor As on an AccuGrade System with a new 312-0754 Position Sensor As, you do not need to calibrate the new sensor. If you are replacing a 265-8059 Position Sensor As with an 312-0754 Position Sensor As the new sensor will need to be calibrated. The calibrations for the 312-0754 Position Sensor As are stored in the display.If you are replacing a 243-4115 Position Sensor, 243-4116 Inclination Sensor, 243-4117 Inclination Sensor or a 243-4118 Inclination Sensor on a CAES system with a 312-0754 Position Sensor As or 312-0755 Position Sensor As, the new sensor needs to be calibrated. The calibration data is stored in the "configuration.ini" file that is located on the D3:C4 Nav 10.4 display. For additional information on mounting and configuring the sensors, refer to Special Instruction, REHS3256, "CAESultra Installation for Excavators" or Special Instruction, REHS3697, "CAESultra Installation for Hydraulic Front Shovels".
Cat SIS web machinery list:
Parts plate Caterpillar catalog:
4427910
PLATE AS
Caterpillar
Caterpillar
4444863
PLATE-SERIAL NUMBER
WS223 SS
WS223 SS
4349898
PLATE
WS223 SS, WSP273
WS223 SS, WSP273
4165315
PLATE AS
3516C
3516C
1157857
PLATE
3512, 3512B, 3516B
3512, 3512B, 3516B
3934842
PLATE
CX31-C18I
CX31-C18I
9L0502
PLATE
1673, 1673B
1673, 1673B
9L1368
PLATE
1673, 1673B
1673, 1673B
9L0497
PLATE ASSEM.
1673, 1673B
1673, 1673B
9L0876
PLATE
1673, 1673B
1673, 1673B
3431969
PLATE-LIFTING
C15, C18, D8T, D9T
C15, C18, D8T, D9T
3273485
PLATE
G3304B, G3306B
G3304B, G3306B