PLATE-CLAMP 4325119 - Caterpillar

Monitor Panel (5) - If the indicator light comes on, a problem may exist in the monitor panel. The problem might also exist in the data communication lines. Consult your Caterpillar dealer for the necessary repairs. The machine can be operated, but the electronic monitor panel will not function. Perform any necessary repairs as soon as possible.Note: If Electronic Controller (4) and Monitor Panel (5) come on at the same time, there is a malfunction. This malfunction is in the communication between the electronic controller and the monitor panel. In this case, consult your Caterpillar dealer for any necessary repairs.
Coolant Level (6) - If this indicator is activated, the coolant level is below the specified level. Add coolant. If the engine start switch is placed in the ON position for 2 seconds or longer, the prestart monitoring function is activated in order to check the coolant level. This indicator will not go off unless the engine start switch is turned off. If the engine start switch is not placed in the ON position for 2 seconds or longer, the prestart monitoring function will not be activated and the indicator will go off after flashing for 5 seconds.
Engine Oil Level (7) - If this indicator is activated, the engine oil level is below the specified level. Add engine oil. If the engine start switch is placed in the ON position for 2 seconds or longer, the prestart monitoring function is activated in order to check the engine oil level. This indicator will not go off unless the engine start switch is turned off. If the engine start switch is not placed in the ON position for 2 seconds or longer, the prestart monitoring function will not be activated and the indicator will go off after flashing for 5 seconds.
Hydraulic Oil Level (8) - If this indicator is activated, the hydraulic oil level is below the specified level. Add hydraulic oil. If the engine start switch is placed in the ON position for 2 seconds or longer, the prestart monitoring function is activated in order to check the hydraulic oil level. This indicator will not go off unless the engine start switch is turned off. If the engine start switch is not placed in the ON position for 2 seconds or longer, the prestart monitoring function will not be activated and the indicator will go off after flashing for 5 seconds.
Fuel Level (9) - If the fuel in the tank is below the specified level, this indicator will come on. Add fuel. Note: This machine is not equipped with an air inlet heater. However, the indicator for the air inlet heater (10) will come on when the electronic monitoring system is tested.
Illustration 4 g00115408
Hydraulic Tank Pressure (14) - If this indicator is activated, the hydraulic tank pressure has not yet reached the operating level. While the indicator is activated, the engine speed is limited to a speed that is less than maximum engine speed. The engine speed is limited in order