PLATE 4363113 - Caterpillar

To Test The Adjustment: Pull the clutch lever to the engaged position. The lever should go into this position with a distinct snap, and should require a reasonably hard pull. The clutch should be checked every 500 service hours for proper adjustment. To Adjust: Remove the plate from the top of the clutch compartment. Turn the clutch adjusting collar (2) until the lock pin (1) is accessible. Pull the lock pin out and turn the collar to the right until the lock pin drops into the next hole.Test the adjustment by engaging the clutch. If one hole gives a slightly loose adjustment and the next gives too tight an adjustment, use the looser adjustment.
STARTING ENGINE CLUTCH ADJUSTMENT
1-Lock pin. 2-Adjusting collar.