PLATE 4369012 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8S-2264     Puller Group     1    
1P-0510 Driver Group     1    
4B-3903 Bolt     2    
9M-1974 Flat Washer     4    
B     5F-7465     Puller     1    
1P-7461 Legs     2    
5P-4750 Screw     1    
1P-0510 Driver Group     1    Start By:
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01101100
Remove O-ring seal (2) , adapter (1) , and bolt (3) from the water pump. Remove the O-ring seal from the adapter.
Illustration 2 g01101101
Use Tooling (A) to remove impeller (4) .
Illustration 3 g01101105
Remove bolt (5) .
Use Tooling (B) to remove gear (6) .
Illustration 4 g01101106
Remove bolts (7) , retainer (8) , and bearing assembly (9) .
Illustration 5 g01101108
Tap on shaft (10) with a rubber hammer in order to remove the shaft from ring (11) and seal assembly (12) .
Remove ring (11) and seal assembly (12) from the impeller side of the water pump.
Illustration 6 g01101111
Remove lip seal (13) from the gear side of the water pump.