PLATE-IDENTIFICATION 4395615 - Caterpillar

1. Extend cylinder (2). Remove oil lines (7) and (8) from the cylinder (2). Fasten a hoist to the cylinder.2. Remove cotter pin (3) from pin (6). Remove pin (6) from the cylinder (2) and circle (1).3. Remove bolt (4) from pin (5). Remove pin (5) from the cylinder and the blade assembly.4. Remove blade tip cylinder (2). Weight is 33.5 Kg (74 lbs.). The following steps are for installation of the blade tip cylinder.5. Fasten a hoist to the cylinder (2). Put blade tip cylinder (2) in position on circle (1) and the blade.6. Install two pins (5) and (6) that hold the cylinder (2) on the machine. Install bolt (4) that holds the pin (5) to the blade. Install cotter pin (3) that holds the pin (6) to the circle (1).7. Connect oil lines (7) and (8) to their correct locations on the cylinder.8. Fill the hydraulic tank with oil to its correct level. See the Operation and Maintenance Manual.