AVSPARE.COM
parts catalog

PLATE-WEAR(LH) 4415545 - Caterpillar



4415545 PLATE-WEAR(LH) Caterpillar parts PLATE
Rating:
21
Alternative (cross code) number:
CA4415545
441-5545
4415545
Caterpillar 4415545 PLATE-WEAR(LH)

Buy PLATE-WEAR(LH) 4415545 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Schematic Code 200000
Illustration 1 g00919310
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage.Schematic Code 200100
Illustration 2 g00919400
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage. (8) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 230000
Illustration 3 g00919413
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage.Schematic Code 230100
Illustration 4 g00919424
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage. (8) At start-up, this contact should be closed at 90% of the rated speed.


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.