AVSPARE.COM
parts catalog

PLATE-WEAR 4416165 - Caterpillar



4416165 PLATE-WEAR Caterpillar parts PLATE
Rating:
46
Alternative (cross code) number:
CA4416165
441-6165
4416165
Caterpillar 4416165 PLATE-WEAR

Buy PLATE-WEAR 4416165 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 7
 
  For full view, you need register

Information:


Section A-A
Section B-B
Section C-C
Section D-D
Section E-E All bores must be free of paint. Bore surfaces must be free of paint and grease prior to assembly of bearings. Coat all bores for pins with lubricant including bucket and cylinder pin bores.(1) Torque pin retainer bolt to ... 325 40 N m (240 30 lb ft)(2) 5I3299 Pin Assembly: Outside diameter ... 79.850 0.025 mm (3.1437 .0010 in)Plating thickness ... 0.005 mm (.0002 in) minimum(3) Bucket cylinder pin bore diameter ... 80.037 0.037 mm (3.1511 .0015 in)(4) Shim as required to adjust lateral clearance to ... 1.6 mm (.06 in) maximum: 930083 Shim thickness ... 1.0 mm (.04 in)7Y2498 Shim thickness ... 1.6 mm (.06 in)930115 Shim thickness ... 2.0 mm (.08 in)(5) 7Y3553 Bearing: Outside diameter ... 106.200 0.013 mm (4.1811 .0005 in)Inside diameter ... 90.27 0.02 mm (3.554 .001 in)Bearings must be assembled so that thrust groove (6) is to the inside of the boss and one groove is at the top of the bore.Install bearing in bore (two places) ... 9.5 0.8 mm (.37 .03 in)(7) Lubricate sealing lips lightly with lubricant being sealed.(8) 7Y3551 Bearing: Outside diameter ... 85.160 0.013 (3.3528 .0005 in)Inside diameter ... 70.23 0.02 mm (2.765 .001 in)Install bearing in bore (two places) ... 7.5 0.8 mm (.30 .03 in)(9) 1035354 Bearing: Outside diameter ... 130.240 0.013 mm (5.1276 .0005 in)Inside diameter ... 110.30 0.02 mm (4.342 .001 in)Install bearing in bore (two places) ... 9.5 0.8 mm (.37 .03 in)(10) 1132963 Pin Assembly: Outside diameter ... 89.850 0.025 mm (3.5374 .0010 in)Plating thickness ... 0.005 mm (.0002 in) minimum(11) Stick cylinder pin bore diameter ... 90.043 0.043 mm (3.5450 .0017 in)(12) Shim as required to adjust lateral clearance to ... 1.6 mm (.06 in) maximum: 930084 Shim thickness ... 1.0 mm

Caterpillar parts catalog:

Caterpillar parts catalog
320E, 320E L & 320E LN Excavators DFG00001-UP (MACHINE) POWERED BY C6.6 Engine
320E LRR Excavator PNL00001-UP (MACHINE) POWERED BY C6.6 Engine
323E L, 323E LN & 323E SA Excavators RAP00001-UP (MACHINE) POWERED BY C6.6 Engine


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.