AVSPARE.COM
parts catalog

PLATE 4416293 - Caterpillar



4416293 PLATE Caterpillar parts PLATE
Rating:
26
Alternative (cross code) number:
CA4416293
441-6293
4416293
Caterpillar 4416293 PLATE
Weight: 2 pounds 1 kg.

Buy PLATE 4416293 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g02531897
Table 1
Specification for 219-5849 Cylinder Head Gp
Item Qty Part Specification Description
- 14 142-7289 Cylinder Head Fastener Gp Use the following procedure to tighten the cylinder head bolts:
1. Tighten bolt 1 through bolt 14 in a numerical sequence to 300 15 N m (220 11 lb ft).
2. Loosen bolt 1 through bolt 14 to 0 N m (0 lb ft).
3. Tighten bolt 1 through bolt 14 in a numerical sequence to 130 15 N m (95 11 lb ft).
4. Again, tighten bolt 1 through bolt 14 in a numerical sequence to 130 15 N m (95 11 lb ft).
5. Turn bolt 1 through bolt 14 in a numerical sequence to an additional angle of 90 degrees (1/4 turn).
Before assembly, lubricate the threads and the bearing surfaces of bolt 15 through bolt 20 with 4C-5599 Anti-Seize Compound.
6. Tighten bolt 15 through bolt 20 in a numerical sequence to 55 7 N m (41 5 lb ft).
- 6 8T-7950 Bolt
C 6 8M-5860 Cup Plug Before assembly, apply Loctite #120540 to the bores.
Installation depth of the cup plug is 1.25 0.25 mm (0.049 0.010 inch).
D 6 227-1200 Injector Sleeve Length for applying green Loctite 620 on the injector sleeve is 4.0 mm (0.16 inch).
21 6 310-7257 O-Ring Seals Apply clean engine oil.
22 6 310-7255 O-Ring Seal
Illustration 2 g02531938
Right side view of engine
Table 2
Specification for 219-5849 Cylinder Head Gp
Item Qt Part Specification Description
23 2 319-6234 Plug As Torque to 184 18 N m (136 13 lb ft).
G - - Height of new cylinder head is 158.00 0.15 mm (6.220 0.006 inch).
K 4 8M-5860 Cup Plug Before assembly, apply Loctite #120540 to the bores.
Installation depth of the cup plug is 1.25 0.25 mm (0.049 0.010 inch).
L 2 4F-5695 Cup Plug Before assembly, apply Loctite #120540 to the bores.
Installation depth of the cup plug 1.25 0.25 mm (0.049 0.010 inch).
24 6 307-2671 Plug As Torque to 16.0 1.5 N m (140 13 lb in).
N 2 8M-5860 Cup Plug Before assembly, apply Loctite #120540 to the bores.
Installation depth of the cup plug is 1.25 0.25 mm (0.049 0.010 inch).


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.