PLATE AS 4448294 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 140-7742 Sleeve 1
C 276-8831 Pin Driver Cap M30 1
D 276-8833 Pin Driver Cap M36 1
E 5P-0960 Grease Cartridge -
Apply Tooling (E) to the bearings and the seals in the stick and the power link.
Illustration 1 g01213330
Attach a suitable lifting device to right hand idler link (10). The weight of right hand idler link (10) is approximately 52 kg (115 lb). Use the suitable lifting device to position right hand idler link (10).
Install Tooling (C) to pin assembly (9). Apply Tooling (E) to pin assembly (9). Use two people to position pin assembly (9). The weight of pin assembly (9) is approximately 43 kg (95 lb). Use Tooling (C) to install pin assembly (9).
Illustration 2 g01213104
Attach a suitable lifting device to left hand idler link (7). The weight of left hand idler link (7) is approximately 50 kg (110 lb). Install left hand idler link (7). Install plate (8).
Remove Tooling (C) and install the grease fitting onto pin assembly (9).
Illustration 3 g01213417
Temporarily install O-ring seals (3) onto the flanges of the bucket at the pin bore for the power link.
Illustration 4 g01213331Note: Prior to installing power link (4), make sure that the grease fitting in the rod end of the bucket cylinder is facing away from the stick.
Attach a suitable lifting device and Tooling (B) to power link (4). The weight of power link (4) is approximately 240 kg (529 lb). Position power link (4) on the rod end of the bucket cylinder and between the right hand idler link and the left hand idler link. Note: If necessary, start the machine in order to extend or retract the bucket cylinder in order to align the power link and the idler links with the bucket cylinder.
Apply Tooling (E) to pin assembly (6).
Install Tooling (D) on pin assembly (6).
Use a suitable lifting device to position pin assembly (6). The weight of pin assembly (6) is approximately 43 kg (95 lb). Use Tooling (D) to install pin assembly (6).
Illustration 5 g01213439
Install plate (5). Note: If necessary, start the machine in order to extend or retract the bucket cylinder in order to align the power link with the bucket cylinder.
Lower power link (4) until the pin bore is aligned with the pin bore of the bucket.
Illustration 6 g01213334
Apply Tooling (E) to pin assembly (1).
Install Tooling (D) on pin assembly (1). Use a suitable lifting device to position pin assembly (1). The weight of pin assembly (1) is approximately 54 kg (120 lb). Use Tooling (D) to install pin assembly (1).
Illustration 7 g01213478
Install bolt (2) on pin assembly (1).