PLATE-MAST 4594210 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     6V-4186     Fuel Pump Timing Pin     1    
B     0L-2070     Bolt     1    
C     5P-7307     Engine Turning Tool     1    
D     4C-9874     Spanner Wrench     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00476281
Install washer (1) and bolt (2). Ensure that the cover of the fuel pump housing is removed. Turn the fuel pump camshaft in the direction of the engine rotation until Tool (A) can be installed in the notch of the camshaft.
Install Tool (A) and (B) into position. Install the weight assembly for the timing advance on the fuel injection pump camshaft.
Illustration 2 g00476286
Use Tool (D) on the automatic timing advance and maintain a constant torque of 68 N m (50 lb ft). Tighten the bolt that fastens the automatic timing advance to the fuel pump camshaft to a torque of 270 25 N m (200 18 lb ft).
Remove Tools (A), (B), (C) and (D). Install the starting motor.End By: Install the front housing. Refer to Disassembly and Assembly, "Front Housing - Install".