PLATE AS 4595128 - Caterpillar

Disconnect harness assemblies (69), (70), and (73). Cut cable straps (68), (71), and (72) .
Illustration 31 g01411831
Disconnect hose assembly (74) .
Illustration 32 g01411832
Disconnect clip (75) .
Illustration 33 g01411836
Disconnect harness assembly (77). Disconnect cable assembly (76) .
Illustration 34 g01411861
Remove cover (78) and disconnect harness assembly (79). Remove clamp (80) .
Illustration 35 g01411863
Remove clips (81) .
Illustration 36 g01411864
Disconnect cable assembly (82). Disconnect harness assemblies (83), (84), (85), (86), and (87) .
Illustration 37 g01411866
Remove hose (88) and disconnect hose (89) .
Illustration 38 g01411862
Cut cable strap (90) .
Illustration 39 g01411893
Disconnect hose assemblies (91) and (92) from the refrigerant compressor.
Illustration 40 g01411892
Disconnect heater hoses (93) and (94) from the water pump.
Illustration 41 g01412461
Remove bottom guard (95) .
Illustration 42 g01411894
Remove clips (96) .
Illustration 43 g01411907
Disconnect grounding strap (97) .
Illustration 44 g01411908
Remove clip (98) and place the hose assemblies to the side. Disconnect lower radiator hose (99) .
Illustration 45 g01411910
The engine and main hydraulic pump (100) will be removed as one unit. Attach Tooling (A), Tooling (B), and a suitable lifting device to the engine and main hydraulic pump (100). The weight of the engine and main hydraulic pump (100) is approximately 1111 kg (2450 lb). Remove four engine mounting bolts (101). Remove the engine and main hydraulic pump (100) .