PLATE-WEAR 4649625 - Caterpillar

Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01438540
Position drift reduction valve (9). Install bolts (7) and (6).
Connect hose assemblies (10) and (8).
Illustration 2 g01430934
Install panel (5) and bolts (4).
Illustration 3 g01430929
Install cable straps (3).
Illustration 4 g01429578
Install platform (1) and bolts (2).
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper filling procedure.