PLATE-MOUNTING 4657708 - Caterpillar

Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
Illustration 1 g06225681
Raise the right hood (1) and support hood (1) with a suitable lifting device.
Illustration 2 g06225706
Disconnect hose assemblies (2). Remove clip (3) and pin (4).
Illustration 3 g06225740
Remove clip (5) and pin (6). Remove hydraulic cylinder (7).Installation Procedure
Install hydraulic cylinder (7) in the reverse order of removal.