PLATE 4670383 - Caterpillar

Introduction
The AccuGrade® Version 10.10 Software is now available. The AccuGrade® v10.10 will be shipped with all new Electronic kits for AccuGrade GPS.AccuGrade® Version 10.10
The AccuGrade Version 10.10 Software supports the following AccuGrade technologies that are listed in Table 2.
Table 2
   TTT    MG    
Dual Laser     X     X    
Single Laser     X     X    
Single Laser and Cross Slope         X    
Cross Slope         X    
Sonic and Cross Slope         X    Features
Illustration 1 g01501979
Removal Of The E103 Internal Module Overtemp Event Configuration
The Internal Module Overtemp Event is no longer active.Removal Of The CB28 Error Logged on Diagnostic Screen
Invalid Serial Number Error is no longer active.AccuGrade® User Level Set to L4
The CD610 Display is set to L4 in the factory therefore eliminating the need to acquire service agreements for different levels. Refer to Illustration 1.Minimum Version Of Firmware
Table 2 lists the recommended minimum version of firmware for the system components that are used with AccuGrade® Version 10.10 Software.Note: Refer to the documents in Table 1 for detailed information on upgrading the system firmware.
Table 3
AccuGrade Version 10.10    
Component Part Number    Description    Component    Version    Firmware Part Number    
282-8241     Display     CD610     10.10     280-6901    
276-6146     Angle Sensor     AS400TC     3.04     304-4231    
226-9170     Angle Sensor     AS400     1.94     296-2868    
265-8047     Pitch Sensor     AS21     1.54     294-5812    
226-2333     Electric Mast     EM400C     1.86     297-0153    
244-1714     Rotation Sensor     RS400C     1.89     284-5170    
253-8330     Sonic Tracer     ST400C     1.03     293-0773    
226-2334     Laser Receiver     LR400C     1.83     297-0154    
253-8329     Laser Receiver     LR410C     1.88     292-1268    
262-1408     Valve Module     A4VM     (1)     (1)    
( 1 ) Reference SIS Web "Service Software Files" for the latest Machine Specific Valve Module Software.The software that is listed in Table 3 is available on the "Downloads" page of SIS Web.
Illustration 2 g01502017
Access the Download Section by clicking on the "Downloads" Link (1) on the SIS Web home page. Refer to Illustration 2.The file that is downloaded is a self-extracting zip file that contains all the current production software for AccuGrade® Version 10.10 on Motor Graders and Track Type Tractors.Once the software is extracted, the software is broken into folders in order to help clarify the use of the different file types. Software is available to update the component through Caterpillar ET.Folder Structure
Display - Contains the firmware (.fls) to update the Display through Caterpillar ETSensors - Contains the firmware (.fls) to be flashed through Caterpillar ETValve Module - Contains the firmware (.fls) to be flashed through Caterpillar ET