PLATE-WEAR 4769855 - Caterpillar

Installation Procedure
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 1 g00481004
Install the idler to the elevator. The idler weighs 36 kg (80 lb). Install washer (6) and bolt (5) to idler (3) . Install nut (4) to bolt (5) . Tighten the nut to a torque of 1230 70 N m (907 52 lb ft). Remove the tooling from the idler.
Illustration 2 g00481002
Install the gasket and cover (2) to idler (3) . Install four bolts (1) to cover (2) . Remove the tooling from the elevator. Fill the idler with 5P-0960 Molybdenum Grease after installation. Repeat the procedure for the other side.