PLATE 4951267 - Caterpillar

Illustration 1 g01432971
Remove the bolts and frame assembly (2) from first stage conveyor (1) .
Place the first stage conveyor on a flat level surface.
Illustration 2 g01433108
Remove bolts (3) and nuts (4) from both sides of first stage conveyor (1) .
Illustration 3 g01433384
Attach a suitable lifting device to the right gerotor motor assembly (5). The weight of gerotor motor assembly (5) is approximately 45 kg (100 lb).
Remove bolts (6) and gerotor motor assembly (5) .
Illustration 4 g01433392
Attach a suitable lifting device to the left gerotor motor assembly (8). The weight of gerotor motor assembly (8) is approximately 45 kg (100 lb).
Remove bolts (7) and gerotor motor assembly (8) .
Illustration 5 g01433395
Remove bolts (10) and frame (9) .
Illustration 6 g01433400
Attach Tooling (A) and a suitable lifting device to first stage conveyor (1). The weight of first stage conveyor (1) is approximately 980 kg (2160 lb). Raise first stage conveyor (1) approximately 305 mm (12 inch) off the ground.
Attach lifting slings and a suitable lifting device in order to remove conveyor pulley (11). The weight of conveyor pulley (11) is approximately 84 kg (185 lb).Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     189-0409     Shackle As     2    
Illustration 7 g01433400
Attach Tooling (A) and a suitable lifting device to the conveyor frame. The weight of conveyor assembly (18) is approximately 980 kg (2160 lb). Raise first stage conveyor (1) approximately 305 mm (12 inch) off the ground.
Attach lifting slings and a suitable lifting device in order to install conveyor pulley (11). The weight of conveyor pulley (11) is approximately 84 kg (185 lb).
Illustration 8 g01433395
Install frame (9) and bolts (10) .
Illustration 9 g01433392
Attach a suitable lifting device to the left gerotor motor assembly (8). The weight of gerotor motor assembly (8) is approximately 45 kg (100 lb).
Install gerotor motor assembly (8) and bolts (7) .Note: Use two guide pins to install gerotor motor assembly (8) .
Illustration 10 g01433384
Attach a suitable lifting device to the left gerotor motor assembly (5). The weight of gerotor motor assembly (5) is approximately 45 kg (100 lb).
Install gerotor motor assembly (5) and bolts (6) .Note: Use two guide pins to install gerotor motor assembly (5) .
Illustration 11 g01433108
Install bolt (3) and nuts (4) to both sides of first stage conveyor.
Place the first stage conveyor on suitable stands.
Illustration 12 g01432971
Install frame assembly (2) and the bolts to first stage conveyor (1) .End By: Install the conveyor (first stage). Refer to Disassembly and Assembly, "Conveyor (First Stage) - Remove and Install".