PLATE 4969798 - Caterpillar

4969798 PLATE Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4969798
496-9798
4969798

Weight: 0.20 pounds 0 kg.

Buy PLATE 4969798 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 9

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

D3K XL & LGP Track Type Tractors FFF00001-UP (MACHINE) POWERED BY C4.4 Engine

254-0664: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP45730377

D4K XL & LGP Track Type Tractor MMM00001-UP (MACHINE) POWERED BY C4.4 Engine

254-0664: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP45740364

D3K2 Small Track Type Tractor FT300001-UP (MACHINE) POWERED BY C4.4 Engine

394-3655: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP64400327

D5K2 XL & D5K2 LGP Small Track Type Tractor KW200001-UP (MACHINE) POWERED BY C4.4 Engine

394-3657: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP68810498

D4K2 XL & D4K2 LGP Small Track Type Tractor KM200001-UP (MACHINE) POWERED BY C4.4 Engine

394-3655: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP68820437

D3K2 XL & D3K2 LGP Small Track Type Tractor JPJ00001-UP (MACHINE) POWERED BY C4.4 Engine

254-0664: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP68830582
394-3655: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP68830584

D5K2 XL & D5K2 LGP Small Track Type Tractor WT300001-UP (MACHINE) POWERED BY C4.4 Engine

394-3657: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP68840334

D4K2 XL & D4K2 LGP Small Track Type Tractor MT300001-UP (MACHINE) POWERED BY C4.4 Engine

394-3655: ADJUSTMENT GP-HYDRAULIC TRACK » SEBP68850308

Information:

(1) 5F-9035 Spring for stem: Length under test force ... 38.9 mm (1.53 in)Test force ... 31.6 to 37.2 N (7.12 to 8.35 lb)Free length after test ... 50.8 mm (2.00 in)Outside diameter ... 19.1 mm (.75 in)Striker adjustment procedure: 1. Place a 25.4 mm (1.00 in) ball of putty (or similar material) on the front of the frame stops.2. Start the engine and raise an empty bucket approximately 30 cm (1 ft) off the ground. Disengage the parking brake.3. Place the engine at high idle and steer rapidly into both stops.4. Steer the machine into the straight ahead position and engage the parking brake. Stop the engine.5. Measure the thickness of the putty. The putty must be pressed to 19 3 mm (.75 .12 in).6. If necessary, adjust the strikers until this dimension is correct.