PLATE AS 4E0410 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    Start By:
Remove the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01502452
Disconnect harness assemblies (3). Remove bolts (1) and reposition electrical box (2) .
Illustration 2 g01502453
Disconnect hose assemblies (4) .
Illustration 3 g01502454
Disconnect hose assemblies (5) .
Illustration 4 g01502455
Loosen clamps (6) and remove hose (7) .
Illustration 5 g01502456
Disconnect hose assembly (8) .
Illustration 6 g01502458
Disconnect hose assemblies (9) .
Illustration 7 g01505417
Disconnect hose assemblies (10) .
Illustration 8 g01505419
Disconnect harness assembly (11) .
Illustration 9 g01505438
Attach Tooling (A) and a suitable lifting device to main hydraulic pump (12). The weight of main hydraulic pump (12) is approximately 109 kg (240 lb).
Remove bolts (13). Remove main hydraulic pump (12) .