4I0738 PLATE Caterpillar parts
325
Rating:
Alternative (cross code) number:
CA4I0738
4I-0738
4I0738
CA4I0738
4I-0738
4I0738
Weight: 7 pounds 3 kg.
EXCAVATOR,
Compatible equipment models: 4I0738:
Number on catalog scheme:
2
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-9971 Ram Adapter 1
B 146-2457 Hydraulic Power Supply Gp 1
223-3506 Hydraulic Cylinder and Lines Gp 1
C 4C-9540 Bench 1
D 4C-4474 Socket Wrench Assembly 1
E 9S-3263 Thread Lock Compound 1
The spring of the recoil spring assembly is compressed under several tons of force.Do not attempt to compress or release the tension of the spring with the nut on the end of the retaining rod.Damaged threads on the retaining rod or nut can cause the assembly to come apart with force, resulting in injury or death.
Note: Prior to assembling the recoil spring assembly, make sure that Tooling (A) is on a level surface.
Illustration 1 g01191789
Check the condition of the threads on recoil spring retaining rod (14) and nut (7). If the threads are worn or damaged, use new parts for replacement.
Check the inside of support assembly (12). Make sure that the support assembly is clean and free of dirt.
Assemble the recoil spring assembly loosely. Install spring (11) in support (12). Install recoil spring retaining rod (14) and support (10).
Illustration 2 g01191794Note: The use of a pry bar might be necessary to line up support (10) with the spring assembly. Place the pry bar between the recoil spring assembly and movable plate (3) of Tooling (C) to line up support (10) with the spring assembly.
Illustration 3 g01191796
Use a suitable lifting device to position the recoil spring assembly on adjustable supports (1) in Tooling (C). The weight of the recoil spring assembly is approximately 509 kg (1122 lb). Adjust the supports to align the centerline of the recoil spring assembly with the centerline of Tooling (C).
Illustration 4 g01191797
Illustration 5 g01191798Note: The lifting device has been removed from recoil spring assembly (4) to provide a better illustration of level gauge (5).
Put level gauge (5) on recoil spring assembly (4). Reposition recoil spring assembly (4) until the recoil spring assembly is level. Reposition the recoil spring assembly until the retaining rod and nut (7) are centered in the hole in reaction plate (2). Recoil spring assembly (4) is leveled by moving adjustable supports (1) higher or lower. After recoil spring assembly (4) is leveled and centered, install two pins (6) on the back side of reaction plate (2), as shown.
Illustration 6 g01191799
Install Tooling (A) on Tooling (B).
Operate Tooling (B) to hold the recoil spring assembly in position between reaction plate (2) and movable plate (3). Make sure that the recoil spring assembly is level and centered in Tooling (C).
Illustration 7 g01191801
Illustration 8 g01191802
Close covers (8) on Tooling (C). Compress the recoil spring assembly with Tooling (B). Open covers (8)
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-9971 Ram Adapter 1
B 146-2457 Hydraulic Power Supply Gp 1
223-3506 Hydraulic Cylinder and Lines Gp 1
C 4C-9540 Bench 1
D 4C-4474 Socket Wrench Assembly 1
E 9S-3263 Thread Lock Compound 1
The spring of the recoil spring assembly is compressed under several tons of force.Do not attempt to compress or release the tension of the spring with the nut on the end of the retaining rod.Damaged threads on the retaining rod or nut can cause the assembly to come apart with force, resulting in injury or death.
Note: Prior to assembling the recoil spring assembly, make sure that Tooling (A) is on a level surface.
Illustration 1 g01191789
Check the condition of the threads on recoil spring retaining rod (14) and nut (7). If the threads are worn or damaged, use new parts for replacement.
Check the inside of support assembly (12). Make sure that the support assembly is clean and free of dirt.
Assemble the recoil spring assembly loosely. Install spring (11) in support (12). Install recoil spring retaining rod (14) and support (10).
Illustration 2 g01191794Note: The use of a pry bar might be necessary to line up support (10) with the spring assembly. Place the pry bar between the recoil spring assembly and movable plate (3) of Tooling (C) to line up support (10) with the spring assembly.
Illustration 3 g01191796
Use a suitable lifting device to position the recoil spring assembly on adjustable supports (1) in Tooling (C). The weight of the recoil spring assembly is approximately 509 kg (1122 lb). Adjust the supports to align the centerline of the recoil spring assembly with the centerline of Tooling (C).
Illustration 4 g01191797
Illustration 5 g01191798Note: The lifting device has been removed from recoil spring assembly (4) to provide a better illustration of level gauge (5).
Put level gauge (5) on recoil spring assembly (4). Reposition recoil spring assembly (4) until the recoil spring assembly is level. Reposition the recoil spring assembly until the retaining rod and nut (7) are centered in the hole in reaction plate (2). Recoil spring assembly (4) is leveled by moving adjustable supports (1) higher or lower. After recoil spring assembly (4) is leveled and centered, install two pins (6) on the back side of reaction plate (2), as shown.
Illustration 6 g01191799
Install Tooling (A) on Tooling (B).
Operate Tooling (B) to hold the recoil spring assembly in position between reaction plate (2) and movable plate (3). Make sure that the recoil spring assembly is level and centered in Tooling (C).
Illustration 7 g01191801
Illustration 8 g01191802
Close covers (8) on Tooling (C). Compress the recoil spring assembly with Tooling (B). Open covers (8)
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14G, ...
0875840
PLATE
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 315, 315B, 315B L, 315C, 315D L, 317, 317B LN, 318B, 318C, 319C, 319D, 319D L, 31...
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 315, 315B, 315B L, 315C, 315D L, 317, 317B LN, 318B, 318C, 319C, 319D, 319D L, 31...
7I0719
PLATE-INSTRUCTION
307B, 307C, 308C, 311B, 311C, 312B, 312C L, 314C, 315C, 318B, 318C, 320 L, 320B, 320C, 321C, 322, 322 FM L, 322B L, 322B LN, 322C, 325, 325 L, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C L,...
307B, 307C, 308C, 311B, 311C, 312B, 312C L, 314C, 315C, 318B, 318C, 320 L, 320B, 320C, 321C, 322, 322 FM L, 322B L, 322B LN, 322C, 325, 325 L, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C L,...
1207219
PLATE
320B, 322 FM L, 322B L, 325, 325B L
320B, 322 FM L, 322B L, 325, 325B L
1341917
PLATE-WEAR
320B, 320C, 320C L, 320D LRR, 320D RR, 322 FM L, 322B L, 322C, 325, 325B L, 325C, 330, 330B L
320B, 320C, 320C L, 320D LRR, 320D RR, 322 FM L, 322B L, 322C, 325, 325B L, 325C, 330, 330B L
1116072
PLATE
322 FM L, 322B L, 322C, 325, 325B L, 325C, 330B L
322 FM L, 322B L, 322C, 325, 325B L, 325C, 330B L
1129701
PLATE
322 FM L, 322B L, 322C, 325, 325B L, 325C, 330, 330B L
322 FM L, 322B L, 322C, 325, 325B L, 325C, 330, 330B L
1024244
PLATE
320B, 320B FM LL, 320C, 321C, 321D LCR, 325
320B, 320B FM LL, 320C, 321C, 321D LCR, 325
320 L, 320N, 325, 325 L, 325 LN, E120B, E200B, E240C, OEMS
320 L, 320N, 325, 325 L, 325 LN, E120B, E180, E200B, E240, E240C, EL240B, OEMS
7Y4220
PLATE-IDENTIFICATION
320 L, 325, 325 L, 325 LN, E240C
320 L, 325, 325 L, 325 LN, E240C
6I5185
PLATE
320 L, 320C, 325
320 L, 320C, 325
1372827
PLATE
375
375
1372826
PLATE
375
375
1372823
PLATE
375
375
1194497
PLATE
375
375
1194498
PLATE
375
375
1194494
PLATE
375
375
4I0127
PLATE
330 L
330 L
1012259
PLATE
330 L
330 L
4I4819
PLATE
330 L
330 L
4I6870
PLATE AS
350
350
4I0052
PLATE AS
325
325
7Y7757
PLATE AS
325
325