4K7345 PLATE ASSEM. Caterpillar parts
950
Rating:
Alternative (cross code) number:
CA4K7345
4K-7345
4K7345
CA4K7345
4K-7345
4K7345
Weight: 36 pounds 16 kg.
WHEEL LOADER,
Compatible equipment models: 4K7345:
Number on catalog scheme:
None
For full view, you need register
Information:
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
When a Caterpillar Extended Life Coolant (ELC) is used, an Extender must be added to the cooling system. Use a 8T-526 Coolant Test Kit to check the concentration of the coolant.Refer to the Special Publication, SEBU6250, "Caterpillar Machines Fluids Recommendations", "Cooling System Specifications" for more information about the addition of Extender.
Topping off or mixing Cat ELC with other products that do not meet Caterpillar EC-1 specifications reduces the effectiveness of the coolant and shortens coolant service life.Use only Caterpillar products or commercial products that have passed the Caterpillar EC-1 specification for pre-mixed or concentrate coolants. Use only Extender with Cat ELC.Failure to follow these recommendations can result in shortened cooling system component life.
Stop the engine. Allow the cooling system to completely cool.
Open the engine compartment.
Illustration 1 g00936414
Slowly loosen the cooling system pressure cap in order to relieve system pressure. Remove the cooling system pressure cap.
If necessary, drain enough coolant from the radiator in order to allow the addition of the Extender.
Add the recommended amount of extender to the coolant system. Refer to the Special Publication, SEBU6250, "Caterpillar Machines Fluids Recommendations", "Cooling System Specifications" for the proper amount.
Illustration 2 g00936349
Maintain the level of the coolant to the full line on the cooling system expansion tank.
Inspect the gasket on the cooling system pressure cap. Replace the cooling system pressure cap if the gasket is damaged.
Install the cooling system pressure cap.
Close the engine compartment.
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
120G, 12F, 12G, 130G, 140, 141, 14E, 14G, 153, 16, 163, 16G, 172, 173B, 183, 183B, 184, 191, 193, 30/30, 416, 416B, 426B, 428, 428B, 438B, 446, 46, 508, 515, 517, 518, 525, 525D, 527, 528, 535D, 545D,...
14G, 215, 215B, 215C, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 24H, 24M, 307C, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 3...
120G, 12G, 130G, 140B, 140G, 14G, 160H, 1673C, 215, 235, 3204, 330 L, 3304, 3304B, 3306, 3306B, 330B, 350, 518, 528, 561D, 571G, 572G, 627B, 637D, 639D, 815, 816, 916, 920, 926, 930, 931B, 936F, 941, ...
120G, 130G, 215B, 225, 3304, 3304B, 515, 517, 518C, 525, 527, 920, 936F, 941, 950, 951B, 955H, D320A, D330A, D4D, D4E, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, G3304, G3304B
1673C, 16G, 245, 3304, 3306, 3406, 3406B, 3408, 3412, 627B, 950, 983B, D6C, D7F, D8H, D8K
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 245, 245B, 245D, 3304B, 3306, 5130, 5130B, 5230, 5230B, 561B, 561C, 572G, 578, 589, 594H, 613, 621, 621B, 621E, 621F, 621R, 623, 623E, 623F, 627, 627B, 627E, 6...
120G, 130G, 3304, 518, 920, 930, 941, 950, 951B, 955L, D4E, G3304
517, 518, 518C, 613, 613B, 613C, 613C II, 920, 930, 930R, 936, 936F, 941, 950, 955H, 966C, 966R, D250D, D4D, D4E, D4H, D4H XL, D4HTSK II, D4HTSK III, G936
518, 528, 613, 613B, 814, 815, 950, 966C, 980, 980B, D35C, D44B, D550B
508, 814, 815, 816, 936, 950, 950B, 950B/950E, 966C, 966D, 966F, 966G, 966R, G936
950, 966C
814, 950, 966C
6K3413
PLATE
950
950
2Y3811
PLATE
930R, 966C
930R, 966C
2642583
PLATE
950H, 966H, 980H
950H, 966H, 980H
8C8943
PLATE
235D, 980G
235D, 980G