AVSPARE.COM
parts catalog

PLATE-DASH 4L7064 - Caterpillar


4L7064 PLATE-DASH Caterpillar parts
Rating:
41
Alternative (cross code) number:
CA4L7064
4L-7064
4L7064
Caterpillar 4L7064 PLATE-DASH
Weight: 3 pounds 1 kg.

Buy PLATE-DASH 4L7064 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 14 g01091772
Install the O-ring seal and ring (25) to outlet plate (24).
Install the O-ring seal and the ring seal to outlet plate (24).
Illustration 15 g01091770
Install two seal retainers (24) and the two O-ring seals to outlet plate (23).
Illustration 16 g01091769
Install flexplate (22) to outlet plate (23). Install flexplate (22).
Illustration 17 g01091768
Install inserts (20) to vanes (21).Note: Vanes (21) must be installed correctly for proper operation.
Install vanes (21) to rotor (19). Install the vanes with the leading edge at the outside diameter and in the same direction as the rotation of the rotor.
Illustration 18 g01091767
Install ring (18) and rotor (19). The arrow on the chamfer of ring (18) must be in the same direction as the rotation of rotor (19).
Illustration 19 g01091765
Install flexplate (17) with the bronze side towards the rotor.
Illustration 20 g01091764
Install two seal retainers (16) and the two O-ring seals to inlet plate (15).
Illustration 21 g01091763
Install inlet plate (15).
Install two screws (12) in the holes nearest the arrows that are in the same direction as the arrow on the ring. Tighten two screws (12) to a torque of 12 0.5 N m (106 4 lb in).
Illustration 22 g01091761
Install seal ring (14) to cover (11).
Illustration 23 g01091759
Install cover (11) and the cartridge assembly.
Install four bolts (10). Tighten four bolts (10) to a torque of 359 4 N m (265 3 lb ft).
Illustration 24 g01091758
Install vanes (9) to rotor (8).
Illustration 25 g01091757
Install the O-ring seals to adapter (4) and plate (6).
Install ring (5) and two pins (7) to adapter (4).
Install plate (6) and rotor (8) to ring (5).
Illustration 26 g01091756
Install cover (2) and spring (3).
Illustration 27 g01091754
Install pilot oil pump (1).
Install the four bolts that hold pilot oil pump (1). Tighten the four bolts to a torque of 55 7 N m (40 5 lb ft).End By:
Install the implement, steering, pilot, and braking pump. Refer to Disassembly and Assembly, "Vane Pump (Implement, Steering, Pilot, and Braking) - Install".


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.