PLATE AS-ENGINE GROUND 4P6791 - Caterpillar

Illustration 1 g03251057
Table 1
Specification for 207-1656 Steering Cylinder
Item Qty Part Specification Description
1 - - Apply Loctite 609 to the rod end and head end seal grooves before assembly.
2 1 5J-5731 Locknut Lubricate the thread with the oil that is being sealed.
Torque to 2170 220 N m (1600 160 lb ft).
3 1 163-5868 Relief Valve Pressure setting is 19305 345 kPa (2800 50 psi).
Torque to 62.5 2.5 N m (46 2 lb ft).
4 1 211-7936 Tube Assembly Diameter is 127.00 +0.05 -0.00 mm (5 + 0.002 -0.000inch).
5 1 211-7934 Cylinder Head Diameter is 63.59 0.01 mm (2.503 0.0004 inch).
6 4 1D-4608 Bolt Torque to 370 50 N m (270 36 lb ft).
Tighten when the rod is fully extended.
7 1 211-7935 Rod Assembly Diameter is 63.5 +0.00 - 0.05mm (2.500 +0.000 -0.002inch).