PLATE-TRANSITION 4V1708 - Caterpillar

Illustration 1 g01436835
(1) Cover (2) Oil filter base (5) Oil filter (6) O-ring seal (8) O-ring seal (9) Valve plunger (10) O-ring seal (12) Pump bypass valve (13) O-ring seal (14) O-ring seal (15) Spacer (17) O-ring seal (19) Valve plunger (20) O-ring seal (3) StudsPrior to assembly, apply 155-0695 Thread Lock Compound to the studs. The primary oil filter mounting stud is longer than the taperlock stud. Tighten the studs into the oil filter base to the following torque. ... 68 7 N m (50 5 lb ft) (4) Mounting boltsApply 9S-3263 Thread Lock Compound to each of the six mounting bolts.
Illustration 2 g01116558
Section A-A (7) 4N-8150 Spring Assembled length ... 55.25 mm (2.175 inch) Load at assembled length ... 75 6 N (17.0 1.3 lb) Free length after test ... 93.7 mm (3.69 inch) Outside diameter ... 20.6 mm (0.81 inch)
Illustration 3 g01116562
Section B-B (11) 2N-6005 Spring Assembled length ... 96.52 mm (3.800 inch) Load at assembled length ... 92.52 N (21 lb) Minimum operating length ... 45.72 mm (1.800 inch) Load at minimum operating length ... 257.55 N (58 lb) Free length after test ... 124.71 mm (4.910 inch) Outside diameter ... 21.84 mm (0.860 inch)
Illustration 4 g01116568
Section C-CRelief pressure ... 696 kPa (101 psi) (16) 1A-2170 Retainer Spring Assembled length ... 21.4 mm (0.84 inch) Load at assembled length ... 200 15.5 N (45 3.5 lb) Free length after test ... 31.0 mm (1.22 inch) Outside diameter ... 19.6 mm (0.77 inch)
Illustration 5 g01116570
Section D-D (18) 4N-8150 Spring Assembled length ... 55.25 mm (2.175 inch) Load at assembled length ... 75 6 N (17.0 1.3 lb) Free length after test ... 93.7 mm (3.69 inch) Outside diameter ... 20.6 mm (0.81 inch)