PLATE 4Z9049 - Caterpillar

Illustration 1 g02724441
Table 1
Specifications for 235-5974 Track Carrier Roller
Item Qty Part Specification Description
1 - 288-0966 Collar Lubricate the bore lightly with the lubricant that is being sealed.
2 1 1M-8747 Duo-Cone Seal Gp The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of molykote paste to the contacting surfaces of the metal seal rings. The metal seal rings must be assembled square. The rubber toric seals should not bulge and the rubber toric seals should not twist. Refer to Special Instruction, SEHS8364, "Assembly and Installation of Conventional Duo-Cone Seals".
3 1 8P-6188 Retainer Plate Assemble the retainer plate so that the machined surface of the retainer plate faces toward the end of the shaft and the special bearing assembly.
4 1 353-8671 Cover Before assembly, apply Loctite 620 to the outside surface.
5 1 7H-3171 Pipe Plug Before assembly, apply Loctite 243 to the threads.
A - - Minimum length of the shaft that must be free of paint before assembly 108 mm (4.3 inch).