parts catalog

PLATE 4Z9343 - Caterpillar

4Z9343 PLATE Caterpillar parts D11R PLATE
Alternative (cross code) number:
Caterpillar 4Z9343 PLATE

Buy PLATE 4Z9343 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 4Z9343:

TRACK-TYPE TRACTOR  D11R   Caterpillar
Number on catalog scheme: 18
  For full view, you need register


Crank speed/timing sensor (10) is located on the front left of the engine block. The crank speed/timing sensor transmits the speed of the engine to the power train ECM by measuring the speed of the crankshaft.
Illustration 8 g01218879
(11) Torque Converter (12) Torque Converter Outlet Relief Valve (13) Torque Converter Output Speed Sensor (14) Torque Converter Temperature SensorTorque converter output speed sensor (13) is located on the rear of the torque converter housing. This sensor transmits the speed of the torque converter output shaft to the power train ECM.Torque converter temperature sensor (14) sends a signal to the power train ECM. The monitoring system uses this data to drive the torque converter oil temperature gauge.
Illustration 9 g01221322
Transmission output speed sensors (15) are located behind cover (16). The transmission output speed sensors transmit the speed and direction of the output shaft to the power train ECM. The transmission output speed sensors are located inside the transmission and bevel gear case.
Illustration 10 g01107485
(1) Steering Control Lever (17) Rotary Position SensorsSteering control lever (1) contains three rotary position sensors (17). The three sensors are a single component.When the operator moves steering control lever (1), the sensors send a signal to the power train ECM. The power train ECM then sends a corresponding signal to the appropriate pump control solenoid.
Illustration 11 g01218915
Steering control lever (1) uses three rotary position sensors (17) to control the left pump control solenoid (19) and the right pump control solenoid (20) on the steering pump (18). Steering control lever (1) informs the power train ECM of the position of the direction selector, including FORWARD, REVERSE, and NEUTRAL. The power train ECM uses this information to send the appropriate current to the solenoids on the steering pump.
Illustration 12 g01221309
(31) Steering Motor Speed Direction SensorThe steering motor speed direction sensor is located on the left side of the machine.
Illustration 13 g01256298
(21) Priority Valve (22) XMSN Charge Filter Bypass Switch (23) Solenoid for Priority Valve (32) Torque Converter Charge Filter Bypass Switch (33) Transmission Oil Temperature SensorThe priority valve (21) is mounted at the rear of the tractor under the fuel tank.The bypass switch for transmission charge filter (22) is located on the rear of the priority valve housing.The bypass switch for torque converter charge filter (32) is located on the opposite side of the priority valve housing.Solenoid (23) is located on priority valve (21). When solenoid (23) is energized, priority valve (21) sends oil from the torque converter charging section to the torque converter. When solenoid (23) is de-energized, the oil from the torque converter charging section supplements the oil in the transmission charging section.
Illustration 14 g01220117
The steering charge filter bypass (34) and the steering charge pressure sensor (35) is mounted at the rear of the tractor under the fuel tank. The switch and sensor is located at the far left filter to the left of the prioity valve.
Illustration 15 g01240848
The fuel level sender (36) is located at the top of the fuel tank.
Illustration 16 g01107489
(24) Transmission (25) Transmission Hydraulic Control (26) SolenoidsThere is a solenoid (26) for each

Caterpillar parts catalog:

Caterpillar parts catalog
D11R Custom Parts Manual Track-Type Tractor 8ZR00001-UP (MACHINE) POWERED BY 3508 Engine

Parts plate Caterpillar catalog:

345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 5110B, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834H, 83...
5110B, 621K, 623K, 627K, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 834G, 834H, 836G, 836H, 924G, 924GZ, 924H, 924HZ, 966G, 966K, 966M, 966M XE, 972G, 972K, 972M, 972M XE, 980G, 98...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797...
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 777C, 777D, 777F, 777G, 844, 844H, 844K, 854K, 99...
24H, 589, 776C, 776D, 777B, 777D, 777F, 777G, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 844H, 980...
1960225 PLATE
725, 725C, 730, 730C, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 784C, 785C, 785D, 834K, 836K, 844, 9...
1290T, 1390, 2491, 2590, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311D LRR, 311F LRR, 312C, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR...
4J3816 PLATE
215, 215B, 225, 229, 235, 235B, 235D, 245, 245B, 24H, 24M, 5110B, 5130, 5130B, 5230, 5230B, 528, 589, 621, 621B, 621E, 621F, 621G, 621R, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633...
225, 227, 235, 235B, 235D, 245, 320B FM LL, 325B L, 325C, 330B L, 330C L, 5130, 5130B, 5230, 5230B, 539, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 69D, 769...
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 994, 994D, D10, D11N, D11R
993K, 994, 994D, 994F, 994H, D11R, D11T
1163119 PLATE
D10R, D11R, D9R
D10R, D10T, D11R, D9R, D9T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.