PLATE AS 5001225 - Caterpillar

Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillardealer.Required Parts
Table 1
Parts List for 503-9820 Front Lines Gp - 00
Item Qty Part No. Part Name
(1) 1 260-8074 Hose As
(2) 1 310-0165 Control Valve Gp
(3) 1 330-2367 Hose As
(4) 1 528-0959 Support As
(5) 1 148-8340 Connector As
(6) 1 148-8364 Elbow As
(7) 1 164-5567 Quick Disconnect Coupler As
(8) 2 255-1826 Spacer
(9) 1 6V-0852 Dust Cap
(10) 4 8T-4121 Hard Washer
(11) 4 8T-4182 Bolt
(12) 4 8T-4223 Hard Washer
(13) 4 8T-5041 Bolt
(14) 2 150-3072 Plug As
Illustration 2 g06332742
Overview of the 503-9820 Front Lines Gp
Installation Procedure
Illustration 3 g06332749
Close-up of area "A"
(2) 310-0165 Control Valve Gp
(4) 528-0959 Support As
(5) 148-8340 Connector As, port "B1"
(6) 148-8364 Elbow As, port "A1"
(7) 164-5567 Quick Disconnect Coupler As
(8) 255-1826 Spacer
(9) 6V-0852 Dust Cap
(10) 8T-4121 Hard Washer
(11) 8T-4182 Bolt, 40 10 N m (30 7 lb ft)
(12) 8T-4223 Hard Washer
(13) 8T-5041 Bolt
Assemble control valve (2) to support (4) and components as shown.Note: Tighten bolts (11) to 40 10 N m (30 7 lb ft).
Illustration 4 g06332752
(1) 260-8074 Hose As
(2) 310-0165 Control Valve Gp
(3) 330-2367 Hose As
(12) 8T-4223 Hard Washer
(13) 8T-5041 Bolt
(14) 150-3072 Plug As, 76 4 N m (56 3 lb ft), for Manufacturing Purpose Only
Install control valve assembly (2) and hoses (1) and (3) as shown.Note: Tighten plug assembly (14) to 76 4 N m (56 3 lb ft).Note: Component (14) used for "Manufacturing Purposes Only".
Unless specified, tighten all fittings and hardware to standard torque.
Illustration 5 g00687600
Check for leaks.