PLATE AS 5001229 - Caterpillar

Illustration 2 g06332868
Overview of the 504-1056 Pump Lines Gp
Installation Procedure
Illustration 3 g06332887
(1) 8T-4196 Bolt
(2) 8T-4198 Bolt
(3) 1P-4578 Half Flange
(7) 101-7404 Bolt
(8) 153-6237 Elbow As
(9) 266-0955 Flange
(11) 164-5567 Quick Disconnect Coupler As, port "Dr2"
(13) 1P-3703 Rectangular Seal
(15) 4J-0522 O-Ring Seal
(16) 515-4968 Hose As
(17) 515-4974 Block
(18) 552-4139 Hose As, 160 16 N m (118 12 lb ft)
(19) 6V-0852 Dust Cap
(20) 8T-4121 Hard Washer
Install hoses and components as shown.Note: Tighten hose assembly (18) to 160 16 N m (118 12 lb ft).
Illustration 4 g06332889
(4) 5P-7468 Clip
(5) 5P-7469 Clip
(6) 6V-1874 Grommet
(7) 101-7404 Bolt
(8) 153-6237 Elbow As
(9) 266-0955 Flange
(13) 1P-3703 Rectangular Seal
(18) 552-4139 Hose As, 160 16 N m (118 12 lb ft)
(21) 8T-4139 Bolt
(22) 8T-4223 Hard Washer
Install hoses (18) and components as shown.Note: Tighten hose assembly (18) to 160 16 N m (118 12 lb ft).
Illustration 5 g06332891
(8) 153-6237 Elbow As
(10) 153-6242 Connector As
(12) 165-4927 Connector As
(14) 464-7245 Hose As
(18) 552-4139 Hose As, 160 16 N m (118 12 lb ft)
Install components and hoses (18) and (14) as shown.Note: Tighten hose assembly (18) to 160 16 N m (118 12 lb ft).
Unless specified, tighten all fittings and hardware to standard torque.
Illustration 6 g00687600
Check for leaks.