PLATE 5037267 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench As     1    
Turn the fuel supply to the OFF position and turn the power disconnect switch to the OFF position.
Illustration 1 g02080637
Disconnect harness assemblies (1) .
Use Tooling (A) to remove fuel filters (5) from fuel filter base (3) .
Disconnect tube assemblies (2) .
Remove bolts (4) and remove fuel filter base (3) .Installation Procedure
Install fuel filter base (3) in the reverse order of removal.
Lubricate the seal that is found on the fuel filter with the fluid that is being sealed. Use Tooling (A) in order to tighten fuel filters (5) to a torque of 35 3 N m (26 2 lb ft).