PLATE-WEAR 5080642 - Caterpillar

start by:a) remove oil panb) remove vibration damper 1. Install tool (A) on the bottom of the cylinder block as shown. Remove four bolts (1) from crossmember (2). 2. Install tooling (B). Lift the engine until the engine front support is free of crossmember (2). 3. Remove four bolts (4) from the front support. Remove front support (3) and shims (5) from each side of the front support.Install Engine Front Support
1. Install shims (2) on crossmember. Put the engine front support (1) in position on the trunnion. Install the bolts that hold it to the trunnion. Tighten these bolts to a torque of 150 20 lb.ft. (205 27 N m).2. Remove tooling (A) and (B) from the engine cylinder block. Install the bolts that hold the support to the crossmember. Tighten the bolts to a torque of 265 35 lb.ft. (360 47 N m).end by:a) install vibration damperb) install oil pan