PLATE & FILM GP 5090799 - Caterpillar

Illustration 1 g01827095
Illustration 2 g01827097
Fuel tank vent (1) This message is located on the fuel tank by the vent.
Illustration 3 g01827414
This generator tank has been pressure tested at 20.6 kPa (3 psi) for weld integrity. However, it has not been designed as a pressure vessel and must be vented from supplied openings. This tank was designed, manufactured and intended for diesel fuel only. This tank was intended for stationary use only. Maximum load capacity 2250 kg (4960 lb) Fuel tank capacity 1488 L (393 US gal). When filling the via a pump, the overflow fitting of this atmospheric day tank must be plumbed in a continuous downward path toward the main fuel tank without downsizing to prevent a potential fuel spillage. To prevent fuel and compartment contamination, it is recommended to use a 100 mesh fuel strainer for incoming fuel.Size of fuel tank vent (2) This message is located on the fuel tank by the vent.
Illustration 4 g01827434
Maximum Load (3) This message is located on the fuel tank by the lifting points.
Illustration 5 g01827435
Maximum lift 1025 kg (2259 lb)Lift the package from this point. Refer to the following topic:
Operation and Maintenance Manual, "Product Lifting"
Illustration 6 g01825614
This message is located on each side of the enclosure near the end.Rating for lifting equipment (4)
Illustration 7 g01825153
The lifting equipment that is used for lifting this type of generator set must be rated for a total weight of 5000 kg (11000 lb).