PLATE 5094987 - Caterpillar

Do not clean the elements by bumping or tapping them.Inspect the elements after cleaning. Do not use an element with damaged pleats, gaskets or seals.When cleaning with pressure air, use 205 kPa (30 psi) maximum to prevent element damage by too much air pressure.When cleaning with pressure water, use 280 kPa (40 psi) maximum to prevent element damage.
Clean the filter element weekly, but clean the filter element daily when there is a reduction of air circulation.
Illustration 1 g01731918
Open the filter cover that is located on the right fender.
Illustration 2 g01200815
Remove the filter element.
Clean the filter element with compressed air or pressure water. Direct the air or the water along the pleats of the element. You can also wash the element with clean water and nonsudsing household detergent.
Rinse the filter element thoroughly with clear water.
Allow the filter element to air dry. Inspect the element for damage. If the filter element is damaged, replace the filter element.
Install the filter element.
Install the filter cover.