AVSPARE.COM
parts catalog

PLATE AS 5169850 - Caterpillar


5169850 PLATE AS Caterpillar parts
Rating:
71
Alternative (cross code) number:
CA5169850
516-9850
5169850
Caterpillar 5169850 PLATE AS

Buy PLATE AS 5169850 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 9
  For full view, you need register

Information:


Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Simultaneously move the following switches into the REVERSE position:
Left propel override switch (17)
Right propel override switch (18) Note: The REVERSE position of the override switches is toward the rear of the machine.
A fault will appear on the display. Press OK key (19) in order to acknowledge the fault and return the display to the gauge cluster screen.
Use the gauge cluster in the screen for the monitor display in order to record the speed of machine travel in the reverse direction.
After the machine has moved 6 m (20 ft), simultaneously release the following switches:
Left propel override switch (17)
Right propel override switch (18)
Move parking brake switch (4) to the ON position.
Illustration 14 g01548053
Move throttle control switch (20) to the LOW IDLE position. Hold the switch in this position for less than 1 second.
After the engine reaches low idle, move engine start switch (21) to the OFF position.
Illustration 15 g01477449
(D) 6 m (20 ft) (distance of stringline) (E) 305 mm (12 inches) (allowable drift to left) (F) 305 mm (12 inches) (allowable drift to right)
Measure the distance of machine drift. The machine may drift to left (E) or the machine may drift to right (F). The drift of the machine cannot exceed the amount that is specified in the illustration above.
Table 1
Adjustment for Pump Neutral    
Conditions     Travels Straight Forward Using Override Switches for the Propel.     Excessive Drift to Left in Forward Using Override Switches for the Propel     Excessive Drift to Right in Forward Using Override Switches for the Propel    
Speed Forward and Speed Reverse Within
7.0 m/min (23 ft/min).     No adjustment is necessary.     Adjust the screw for the left pump neutral counterclockwise for

Caterpillar parts catalog:

Caterpillar parts catalog
R1700 Load Haul Dump KT400001-UP (MACHINE) POWERED BY C13 Engine


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.