PLATE-CLUTCH 5181967 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1859 Retaining Ring Pliers 1
Illustration 1 g01054104
Remove bolts (2), auger motor (1), and the gasket. Move the auger motor out of the way.
Illustration 2 g01054096
Remove 14 bolts (6), two guards (8), and cover (7).
Loosen bolts (5). Loosen nut (4) and lower planetary assembly (3).
Illustration 3 g01054169
Remove cotter pins (9), side plate (10), and master link (11). Remove chain (12) from the final drive sprocket.
Illustration 4 g01054170
Attach a suitable lifting device to planetary assembly (3). Remove bolts (5), nut (4), and the planetary assembly. The weight of the planetary assembly is approximately 67 kg (148 lb).
Illustration 5 g01054171
Use Tooling (A) and remove retaining ring (13) and washer (14). Loosen set screws (15).
Remove sprocket (16) and shaft key (17).
Illustration 6 g01054174
Attach a suitable lifting device to final drive planetary (19). Remove bolts (18) and remove the final drive planetary from the plate assembly. The weight of the final drive planetary is approximately 50 kg (110 lb).