PLATE-SIDE 5243256 - Caterpillar

Upon installation of the 147-0642 Manifold, remove the 1W-6245 Tube As and the 1W-6250 Oil Tube As. Discard the 1W-6245 Tube As and the 1W-6250 Oil Tube As. The new lines group uses a coolant hose and fittings. The new lines group replaces the tube assembly. Installation of a 140-0024 Oil Supply Tube is also required. Refer to Illustration 2 for assembly instructions.
Illustration 2 g01260513
(1) 006-5707 Pipe Elbow (2) 005-4273 Hose Connector (3) 7X-7958 Hose Clamp (4) 5P-1251 Hose (5) 5P-1230 Connector (6) 3D-2824 O-Ring Seal (7) 7X-7958 Hose Clamp 3412
The following parts list is required for (S/N: 60M).
Table 3
Required Parts for 4N-2247, 130-2549 and 185-5890    
Pt. No.     Description     Qty    
3D-2824     O-Ring Seal     1    
5P-1230     Connector     1    
7W-1890     Elbow     1    
7X-7958     Hose Clamp     2    
5P-1251     Hose     27 cm.    
4N-1918     Gasket     2    
7C-0307     Gasket     10    
109-0076     O-Ring Seal     8    
7M-7273     Gasket     1    
156-1732     Tube As     1    
198-6068     Integral Seal     1    
126-2702     Integral Seal     1    
147-0642     Manifold As     1    Upon installation of the 147-0642 Manifold, remove the 6N-9300 Tube As, the 9L-4007 Flared Elbow and the 4N-6161 Oil Tube As. Discard the 6N-9300 Tube As, the 9L-4007 Flared Elbow and the 6N-4573 Oil Tube As. The new lines group uses a coolant hose and fittings. The new lines group replaces the tube assembly. Installation of a 152-8348 Oil Supply Tube is also required. Refer to Illustration 1 for assembly instructions.