PLATE AS 5274096 - Caterpillar

Stop the machine before changing the speed range. Do not change the speed range while the machine is moving.
Illustration 1 g00952436
Right operator console
LOW Range (1) - In order to place the machine in LOW range, rock the propel speed range control forward. LOW range reduces the overall speed of the machine. This increases the operator control.
Propel Speed Range Control (2) - The propel speed range control is located on the right operator console. The control allows the machine to operate in the HIGH range or the LOW range.
HIGH Range (3) - In order to place the machine in HIGH range, rock the propel speed range control backward. HIGH range increases the speed of the machine. HIGH range is used to move the machine from one job site to another job site. Note: Before you start up a slope or down a slope, LOW range (1) is recommended for optimal performance and maximum control. Do not change the propel speed range control while you go downhill.Note: Operation of the machine in HIGH range (3) for an extended period of time will shorten the life of the propel component.