PLATE-WEAR 5407305 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     140-7742     Sleeve     1    
B     138-7573     Link Bracket     1    Start By:
Remove the engine enclosure.
Remove the hydraulic oil cooler.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01410062
Remove bolt (1). Remove bolts (2) and bracket assembly (3) .
Illustration 2 g01410066
Remove hose (4). Remove bolts (5). Repeat for the other side.
Illustration 3 g01410179
Use a suitable lifting device and Tooling (A) to support bracket assembly (6). Remove bolts (9) and bracket (8). Remove bolts (7) and bracket assembly (6) .
Illustration 4 g01410321
Remove bolts (11). Reposition core assembly (10). Remove bolt (12) .
Repeat Step 4 for the other side. Remove plate (13) .
Illustration 5 g01410339
Remove hose (14). Remove bolt (15) .
Repeat Step 6 for the other side. Remove plate (16) .
Illustration 6 g01410357
Illustration 7 g01410576
Attach Tooling (B) and a suitable lifting device to aftercooler (17). Remove bolts (18) and aftercooler (17). The weight of aftercooler (17) is approximately 18 kg (40 lb).Installation Procedure
Install aftercooler (17) in the reverse order of removal.
Tighten the clamp for hose (14) to a torque of 12 1 N m (106 9 lb in).
Tighten the clamp for hose (4) to a torque of 12 1 N m (106 9 lb in).