5L2908 PLATE Caterpillar parts
3304, 3306, D320A, D333A, D333B, D343, G3306
Rating:
Alternative (cross code) number:
CA5L2908
5L-2908
5L2908
CA5L2908
5L-2908
5L2908
Weight: 0.60 pounds 0 kg.
GAS ENGINE, MARINE ENGINE,
Compatible equipment models: 5L2908:
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The C175 machine engine software announced under Service Magazine, SEPD2039 has been found to be missing functionality. Reference Service Magazine, SEPD2039 for the full list of intended functionality contained within these software releases.The functionality error lies within the derate for -7 injector codes. The derate for multiple level 2 -7 injector codes is not functioning. If multiple level 2 -7 codes are present on one bank of the engine, the engine will not derate as intended. The derate for -7 codes was added to provide protection against cylinders going cold. If an injector is run long enough with a -7 code, the injector becomes at risk for dropping out and not firing. If multiple injectors on one bank fall into this scenario, that bank of the engine becomes at risk for driving higher than normal exhaust temperatures into the engine components.All other functionality within the software as announced in Service Magazine, SEPD2039 is functioning as intended. This includes the level 1 functionality for -7 codes. Usually, a level 1 injector -7 code will be logged 400 hours to 500 hours ahead of a level 2 code, giving ample time to change injectors that are nearing end of life.Solution
Caterpillar recommends the following action with -7 injector codes:
Level 1 -7 code: Change the injectors at the next scheduled Preventive Maintenance (PM)
Level 2 -7 code: Change the injectors at the end of the shiftCurrently Caterpillar recommends continuing installations of the engine software. The additional functionality and improvements in the software outweigh the risks or concerns of the -7 code derate error. Also, this software is required to support the improved fuel injectors announced under Service Magazine, SEPD2052. A detailed plan and timeline are being developed to reinstitute the -7 code derate into the software.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The C175 machine engine software announced under Service Magazine, SEPD2039 has been found to be missing functionality. Reference Service Magazine, SEPD2039 for the full list of intended functionality contained within these software releases.The functionality error lies within the derate for -7 injector codes. The derate for multiple level 2 -7 injector codes is not functioning. If multiple level 2 -7 codes are present on one bank of the engine, the engine will not derate as intended. The derate for -7 codes was added to provide protection against cylinders going cold. If an injector is run long enough with a -7 code, the injector becomes at risk for dropping out and not firing. If multiple injectors on one bank fall into this scenario, that bank of the engine becomes at risk for driving higher than normal exhaust temperatures into the engine components.All other functionality within the software as announced in Service Magazine, SEPD2039 is functioning as intended. This includes the level 1 functionality for -7 codes. Usually, a level 1 injector -7 code will be logged 400 hours to 500 hours ahead of a level 2 code, giving ample time to change injectors that are nearing end of life.Solution
Caterpillar recommends the following action with -7 injector codes:
Level 1 -7 code: Change the injectors at the next scheduled Preventive Maintenance (PM)
Level 2 -7 code: Change the injectors at the end of the shiftCurrently Caterpillar recommends continuing installations of the engine software. The additional functionality and improvements in the software outweigh the risks or concerns of the -7 code derate error. Also, this software is required to support the improved fuel injectors announced under Service Magazine, SEPD2052. A detailed plan and timeline are being developed to reinstitute the -7 code derate into the software.
Cat SIS web machinery list:
Parts plate Caterpillar catalog:
3N7952
PLATE-DRIVE
3114, 3116, 3126, 3126B, 3208, 3304, 3306, 3406, 3406B, 3406E, 3408, 3412, 3412C, 3412D, 3412E, C-9, C18, C32, C7, C9, CX31-C9I, D342C, D348, G3304, G343, TH31-E61
3114, 3116, 3126, 3126B, 3208, 3304, 3306, 3406, 3406B, 3406E, 3408, 3412, 3412C, 3412D, 3412E, C-9, C18, C32, C7, C9, CX31-C9I, D342C, D348, G3304, G343, TH31-E61
4P3020
PLATE-DRIVE
3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3456, C-15, C-16, C-9, C11, C13, C15, C18, C9, C9.3, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, G3306, G3406, TH31-E61, TH35-C15I
3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3456, C-15, C-16, C-9, C11, C13, C15, C18, C9, C9.3, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, G3306, G3406, TH31-E61, TH35-C15I
8N4960
PLATE-THRUST
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 225, 229, 235, 235B, 235C, 235D, 330, 330 L, 3304, 3304...
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 225, 229, 235, 235B, 235C, 235D, 330, 330 L, 3304, 3304...
7W0513
PLATE-FRONT END
3304, 3306, 3406, 3406B, 3406C, CG137-08, CG137-12, G3304, G3304B, G3306, G3306B, G3406, G3408, G3408C, G3412
3304, 3306, 3406, 3406B, 3406C, CG137-08, CG137-12, G3304, G3304B, G3306, G3306B, G3406, G3408, G3408C, G3412
4N4377
PLATE-REAR END
3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3456, 768B, 769, C-10, C-12, C-15, C-16, C-9, C11, C12, C13, C15, C18, C9, CX31-C13I, CX31-C15I, CX31-C9I, ...
3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3456, 768B, 769, C-10, C-12, C-15, C-16, C-9, C11, C12, C13, C15, C18, C9, CX31-C13I, CX31-C15I, CX31-C9I, ...
3T0862
PLATE AS-BRUSH
120G, 12G, 130G, 140G, 14G, 160G, 1673C, 16G, 215, 215B, 235, 245, 3176B, 3176C, 3196, 3208, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412E, ...
120G, 12G, 130G, 140G, 14G, 160G, 1673C, 16G, 215, 215B, 235, 245, 3176B, 3176C, 3196, 3208, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412E, ...
4M1846
PLATE AS-BRUSH
1140, 1160, 12E, 14E, 1673, 1673B, 1673C, 1676, 16G, 215, 245, 3208, 3304, 3306, 3406, 3412, 777, 824, 941, 950, 955K, 966C, 977H, D320A, D330A, D334, D336, D348, D4D, D6C, D7F, G3304
1140, 1160, 12E, 14E, 1673, 1673B, 1673C, 1676, 16G, 215, 245, 3208, 3304, 3306, 3406, 3412, 777, 824, 941, 950, 955K, 966C, 977H, D320A, D330A, D334, D336, D348, D4D, D6C, D7F, G3304
3T4705
PLATE AS-BRUSH
140G, 14G, 1673C, 225, 235, 245, 3204, 3208, 3304, 3306, 3306B, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 572G, 621, 627E, 637E, 776, 777, 815B, 826C, 920, 950B, 980C, D5H, D6D, FB221, G3304, G3512, ...
140G, 14G, 1673C, 225, 235, 245, 3204, 3208, 3304, 3306, 3306B, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 572G, 621, 627E, 637E, 776, 777, 815B, 826C, 920, 950B, 980C, D5H, D6D, FB221, G3304, G3512, ...
7N9342
PLATE-THRUST
120G, 12G, 130G, 140B, 140G, 14G, 160H, 1673C, 215, 235, 3204, 330 L, 3304, 3304B, 3306, 3306B, 330B, 350, 518, 528, 561D, 571G, 572G, 627B, 637D, 639D, 815, 816, 916, 920, 926, 930, 931B, 936F, 941, ...
120G, 12G, 130G, 140B, 140G, 14G, 160H, 1673C, 215, 235, 3204, 330 L, 3304, 3304B, 3306, 3306B, 330B, 350, 518, 528, 561D, 571G, 572G, 627B, 637D, 639D, 815, 816, 916, 920, 926, 930, 931B, 936F, 941, ...
4N6863
PLATE AS-BACKING
120G, 130G, 215, 215B, 224, 225, 229D, 3304, 3304B, 515, 518, 518C, 525, 527, 926, 930, 936F, 950, 950B, 953, 963, CB-534, CS-643, D4E, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, G3508
120G, 130G, 215, 215B, 224, 225, 229D, 3304, 3304B, 515, 518, 518C, 525, 527, 926, 930, 936F, 950, 950B, 953, 963, CB-534, CS-643, D4E, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, G3508
6L2179
PLATE-CLUTCH
3208, 3306, 3406, 3406B, D333A, D333B, D334
3208, 3306, 3406, 3406B, D333A, D333B, D334
7M9919
PLATE (Lock)
12E, 1673, 1673B, 1676, 621, 641, 641B, 657, 657B, 666, 666B, 772, 773, 824, 955H, 977H, 980, D330A, D333A, D333B, D336, D342, D342C, D348, D349, D353C, D379, D379A, D379B, D398, D398A, D398B, D399, G...
12E, 1673, 1673B, 1676, 621, 641, 641B, 657, 657B, 666, 666B, 772, 773, 824, 955H, 977H, 980, D330A, D333A, D333B, D336, D342, D342C, D348, D349, D353C, D379, D379A, D379B, D398, D398A, D398B, D399, G...
5N2872
PLATE
3406
3406
5N3860
PLATE
D379, D379B, D398, D398B, D399, G379, G398, G399
D379, D379B, D398, D398B, D399, G379, G398, G399
3N7462
PLATE
7231
7231
4N0613
PLATE
3304, 627B, 941, 950, D4D, D6C
3304, 627B, 941, 950, D4D, D6C
8H3203
PLATE
651, 657, D326F, D343, D353C, D375D, D397D, D8H
651, 657, D326F, D343, D353C, D375D, D397D, D8H
5D7226
PLATE
3408
3408
6N2075
PLATE
637D, 988B
637D, 988B
5N3301
PLATE
3408
3408
5N3297
PLATE
3408
3408
3L9030
PLATE
7271, D353C, D379, D398, G379, G399
7271, D353C, D379, D398, G379, G399
5N1884
PLATE
3406, D342, D343
3406, D342, D343
7N1199
PLATE
16G, 245, 3406, 621, 980C
16G, 245, 3406, 621, 980C