PLATE 5L7180 - Caterpillar

2. Disconnect the three oil lines (2), (3), and (4) from the pump.3. Remove the two bolts (1); pull pump out to disengage it from pump drive and remove pump from machine. Weight of pump is 50 lb. (23 kg).Install Brake, Implement, And Steering Pump
1. Fill the pump with clean oil and turn the pump shaft.2. Put the pump into position on machine, and install the two bolts.3. Connect the three oil lines to the pump.4. Fill the hydraulic tank with oil to correct level. Start diesel engine and operate hydraulic cylinders. Check oil level in tank and fill as needed.