PLATE 5M7358 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound - Start By:
Remove the turbochargers.
Remove the air inlet shutoff, if necessary.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01984793
Remove bolt (4) and exhaust manifold (3), if necessary.
Remove bolts (5) and brackets (6) for both exhaust manifolds.
Attach a suitable lifting device to exhaust manifold (2). For 3508 Engines, the weight of the exhaust manifold is approximately 50 kg (110 lb). For 3512 Engines, the weight of the exhaust manifold is approximately 55 kg (121 lb). For 3516 Engines, the weight of the exhaust manifold is approximately 85 kg (185 lb). Remove bolts (1) and exhaust manifold (2).
Remove the exhaust manifold gaskets.
Repeat Step 3 and Step 4 for exhaust manifold (7). Installation Procedure
Install exhaust manifold (7) and exhaust manifold (2) in the reverse order of removal.
If the exhaust manifolds were disassembled, apply Tooling (A) to the threads and the bearing surfaces of the nuts and bolts during assembly. Tighten the bolts that are diagonal to each other to a torque of 55 5 N m (41 4 lb ft). Tighten the other bolts that are diagonal to each other to a torque of 55 5 N m (41 4 lb ft).
Apply Tooling (A) to the threads and the bearing surfaces of the nuts and bolts (1) during assembly. Tighten the bolts that are diagonal to each other to a torque of 50 5 N m (37 4 lb ft). Tighten the other bolts that are diagonal to each other to a torque of 50 5 N m (37 4 lb ft).
Apply Tooling (A) to the threads and the bearing surfaces of bolts (5) for both exhaust manifolds and bolt (4).