PLATE 5P1754 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Stering Frame Lock - Separate and Connect".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature the implement hydraulic oil tank is hot and under pressure. Hot oil can cause burns.To prevent possible injury, release the pressure in the implement hydraulic system before hydraulic lines or components are disconnected or removed.
Note: Put identification marks on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the hydraulic tank into a suitable container for storage or disposal.
Illustration 1 g01133146
Disconnect hose assemblies (1), (2), (3), and (4) .
Illustration 2 g01133147
Attach a suitable lifting device onto piston pump (6). The weight of piston pump (6) is approximately 27 kg (60 lb). Disconnect hose assembly (7). Remove bolts (5) and piston pump (6) .