PLATE 5P7269 - Caterpillar

1. Remove bolts (1), the washers, the bolts (2) and the washers from two guards (3). Remove the two guards (3) from the front of the transmission. 2. Remove four bolts (4), the nuts, four bolts (5) and the washers from universal joint group (6). Remove universal joint group (6) from between the differential and the transmission. 3. Remove yoke (7) from the differential.4. Remove bolt (8) that holds yoke (9) to the transmission. Remove yoke (9) and its O-ring seal from the transmission. The following steps are for the installation of the differential drive shaft.5. Position yoke (9) and its O-ring seal in the transmission. Install bolt (8) that holds yoke (9) to the transmission. Tighten bolt (8) to a torque of 120 25 N m (90 15 lb ft).6. Position universal joint group (6) to yokes (7) and (9).7. Install bolts (4), the nuts, four bolts (5) and the washers in universal joint group (6). Tighten bolts (4) and (5) to a torque of 160 25 N m (120 8 lb ft)8. Position two guards (3) to the front of the transmission. Install bolts and washers (1) that hold two guards (3) together. Install bolts and washers (2) that hold the guards to the front of the transmission.