PLATE-PRESS 5P9695 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 154-6185 Guide Stud
MJ24 X 2 by 200 mm 2
B 3E-3879 Eye Bolt 4
C 160-8493 Bolt 1
D 1U-6343 Threaded Stud 4
E 1U-5826 Adjustment Screw Guide Pin 2
F 211-6187 Boss Threaded Rods 4
G 240-0312 Bolt 2
H - Service Tool 1
J - Molylube -
Illustration 1 g06233206
Remove bolts (1) and discard bolts (1).
Illustration 2 g06233208
Install Tooling (A) 180 degrees apart.
Remove bolts (1) and discard bolts (1).
Remove spacer plate (2) and discard spacer plate (2).
Illustration 3 g06233250
Typical Example
Attach Tooling (B) to flywheel (3). The weight of fly wheel (3) is approximately 137 kg (302 lb).
Illustration 4 g06233251
Illustration 5 g06234199
Typical Example
Note: Rock the flywheel in all direction to disengage the crank adapter pilot.
Use Tooling (B) and suitable prybars to disengage the crank adapter. Support flywheel (3) with a suitable crane. Slide flywheel (3) from the engine on Tooling (A). Remove flywheel (3).
Illustration 6 g06234148
Remove O-rings (4) and discard O-rings (4).
Illustration 7 g06233232
Remove O-ring (6) and discard O-ring (6).
Remove seal (5).
Illustration 8 g06233234
Remove bolts (7).
Illustration 9 g06233253Note: Make