PLATE 5Q9394 - Caterpillar

Illustration 1 g03446996
Table 1
Specification for 9L-5651 Engine Oil Pump Gp    
Item     Qty     Part     Specification Description    
Before you install the pump, lubricate the moving parts with clean engine oil. Rotate the pump by hand in order to ensure that the pump rotates freely.    
A     1     2P-0695 Shaft     Diameter of the new shaft is 22.56 0.08 mm (0.888 0.003 inch).    
Bore in the sleeve bearing for the new shaft assembly is
22.288 0.025 mm (0.8775 0.0010 inch).
B     1     6I-1341 Shaft     Diameter of the new shaft is
22.217 0.005 mm (0.8747 0.0002 inch).    
Bore in the sleeve bearing for the new shaft assembly is
22.288 0.025 mm (0.8775 0.0010 inch).
Illustration 2 g03447017
4W-2322 Oil Pump Body As
Illustration 3 g03447018
7W-4455 Cover As
Table 2
Item     Qty     Part     Specification Description    
C     -     -     Position of bearing joints from the centerline through the bearing bores is 30 15 degrees.    
D     1     1F-1006 Dowel     Extension from the oil pump body is
4.1 0.5 mm (0.16 0.02 inch).    
F     1     2P-1169 Idler Gear Shaft     Diameter of the new shaft is
28.512 0.013 mm (1.1225 0.0005 inch).    
Bore in the oil pump body for the new shaft assembly is
28.448 0.013 mm (1.1200 0.0005 inch).