PLATE 5T6380 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tools Part Number Part Description Qty
A 422-8733 Stand 2
Illustration 1 g03855858
Attach a suitable lifting device to drum (20) and install the drum in yoke (21). The weight of a padded drum is approximately 2500 kg (5511 lb). The weight of a smooth drum is approximately 2100 kg (4630 lb).
Install any shims that were removed during disassembly and install bolts (19) on each side of the drum. Raise drum (20) and remove Tooling (A). Lower drum (20) to the floor.
Illustration 2 g03855857
Position hose assemblies (15) inside of the yoke.
Illustration 3 g03855854
Connect hose assemblies (15) on propel motor (16).
Illustration 4 g03855856
Install cover (18) and bolts (17).
Illustration 5 g03855853
Position hose assemblies (6) inside of the yoke.
Install half clamps (14) and bolt (13) on hose assemblies (6). Tighten bolt (13) to a torque of 15 3 N m (133 27 lb in).
Illustration 6 g03855852
Position hose assemblies (9) inside of the yoke.
Illustration 7 g03855849
Install clamp assembly (8) and bolts (7). Tighten bolts (7) to a torque of 12 3 N m (106 27 lb in).
Illustration 8 g03855850
Connect hose assemblies (9) to vibratory motor (10).
Illustration 9 g03855851
Install cover (11) and bolts (12).
Illustration 10 g03855848
Install half clamps (5) and bolt (4) on hose assemblies (6). Tighten bolt (4) to a torque of 15 3 N m (133 27 lb in).
Install half clamps (3) and install bolts (1) loose on hose assemblies (6).
Illustration 11 g03855846
Install cover (2) and tighten bolts (1) to a torque of 15 3 N m (133 27 lb in). End By:
Install the bumper.