PLATE 5V3779 - Caterpillar

Illustration 1 g02490359
Table 1
Specification for 352-8940 Screed Plate Gp    
Item     Qty     Part     Specification Description    
1     12     8I-0212 Stud     Apply Loctite 272 to the threads of the studs.    
2     12     8I-0184 Adjustment Nut     Before assembly, coat the threads of the adjustment nuts with black 4C-5592 Anti-Seize Compound.    
3     2     214-9169 Stud     Apply Loctite 272 to the threads of the studs.    
4     2     1K-6872 Locknut     Tighten the locknut so that spring height is
52.0 2.0 mm (2.05 0.08 inch).    
5     2     4T-4630 Spring     Length under test force is
52.0 mm (2.05 inch).
Test force is
823 66 N (185 15 lb).
Free length after test is
60 mm (2.4 inch).    
6     2     185-5431 Special Bolt     Before assembly, coat the threads of the special bolts with black 4C-5592 Anti-Seize Compound.    
7     2     349-3010 Screed Heater As     Before you install the screed heater assemblies on the screed plate, apply
10 mm (0.4 inch) wide and
5 mm (0.2 inch) thick bead of 257-8023 Thermal Grease to the bottom side of the heaters.    
8     2     349-3011 Screed Heater As     Before you install the screed heater assemblies on the screed plate, apply
10 mm (0.4 inch) wide and
5 mm (0.2 inch) thick bead of 257-8023 Thermal Grease to the bottom side of the heaters.    
9     24     6V-8801 Nut     Apply Loctite 272 to the threads of the nuts.