PLATE 5W4296 - Caterpillar

Solution
Realign components and replace failed tube with new parts in Table 1.
Table 1
Qty Part Number Part Name
1 433-8999 Tube As
4 3B-1915 Bolt
1 6V-5066 O-Ring Seal
2 4N-1320 Gasket
1 9F-8127 Gasket Removal Procedure
Illustration 1 g06214913
(1) 0S-1571 Bolt
(2) 5M-2894 Hard Washer
(3) 0S-1588 Bolt
(4) 160-4322 Adapter
(5) 1C-2251 Bolt
(6) 9S-8752 Full Nut
Remove bolts (1), (3), and (5) with washers (2) and nuts (6) from adapter (4).
Remove Adapter (4).
Illustration 2 g06214919
(7) 357-8795 Tube As and/or 422-9022 Tube As
Remove tube assembly (7).Installation Procedure
Illustration 3 g06214924
(1) 433-8999 Tube As
(2) 6V-5066 O-Ring Seal
Install tube assembly (1) with O-ring seal (2).
Illustration 4 g06214939
(3) 160-4322 Adapter
(4) 9S-8752 Full Nut
(5) 1C-2251 Bolt
(6) 9F-8127 Gasket
(7) 0S-1590 Bolt
(8) 5M-2894 Hard Washer
(9) 252-5810 Bracket
(10) 9X-6458 Hard Washer
(11) 1A-2029 Bolt
Install adapter (3) with gasket (6), nuts (4), bolts (5), (7), and washers (8).The bracket (9) to bracket joint should be left loose at this point. The bolts securing the adapter to the bracket should also be loose before starting. This allows the adapter (3) to move for the next operation.
Illustration 5 g06214974
(8) 5M-2894 Hard Washer
(12) 3B-1915 Bolt
(13) 0S-1571 Bolt
(14) 8N-0386 Flange
(15) 4N-1320 Gasket
(16) Flange
Install gaskets (15) and tighten bolts (12), (13) with washers (8) to flanges (14) and (16).
Illustration 6 g06214995
(4) 9S-8752 Full Nut
(7) 0S-1590 Bolt
(8) 5M-2894 Hard Washer
(9) 252-5810 Bracket
(10) 9X-6458 Hard Washer
(11) 1A-2029 Bolt
Once the tube assembly is secured to the adapter , the adapter is now effectively locked into place. Tighten bolts (7), (11), with nuts (4), and washers (8), (10) to brackets (9) and 252-5811 Bracket with slots.