PLATE AS 6T4837 - Caterpillar

6T4837 PLATE AS Caterpillar parts D10N, D9L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6T4837
6T-4837
6T4837

Weight: 32 pounds 14 kg.

Buy PLATE AS 6T4837 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 6T4837:

TRACK-TYPE TRACTOR D10N D9L Caterpillar

Number on catalog scheme: 9

Caterpillar 6T4837 Parts scheme PLATE AS

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3
B 1U-9200 Lever Puller Hoist 2 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly , " Hydraulic System Pressure - Release".
Connect the steering frame lock. Refer to Disassembly and Assembly , "Steering Frame Lock - Separate and Connect". Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01486813
Illustration 2 g01486815
Remove three bolts (1) from the storage location. Install bolts (1), as shown. Refer to Illustration 1. Tighten bolts (1) evenly until a solid resistance is felt. This will release the parking brake.
Illustration 3 g01486833
Disconnect hose assemblies (2), (3), and (4).
Illustration 4 g01486835
Illustration 5 g01486836
Illustration 6 g01486838
Illustration 7 g01486840
Attach Tooling (A) and Tooling (B) to parking brake assembly (5), as shown. Tooling (A) should be installed onto parking brake assembly (5) only at bolt location (6). Bolts (6) and (9) are used to keep parking brake assembly (5) assembled. Bolts (6) and (9) are located next to notches (7) and (8). The weight of parking brake assembly (5) is approximately 158 kg (350 lb).
Illustration 8 g01487153
Illustration 9 g01486840
Remove bolts (10). Do NOT remove bolts (6) and (9). Bolts (6) and (9) are used to keep parking brake assembly (5) assembled. Bolts (6) and (9) are located next to notches (7) and (8).
Illustration 10 g01487154
Remove parking brake assembly (5).